Hi everyone!Did you miss me?!? been busy with stuff one question im going to be installing an amp and on my wiring harness there is no option for remote.I have a KDC -MP142CR and it only says theres a:

power control/Motor antenna control wire= blue/white

TEL mute wire=brown

Not Used=Blue
^
|
(This one is weird=p)


which ones my remote????

 

Blue/White will be your remote wire.

 

are you sure or is it for the antenna?

 

Yes.....hook it up and then read your manual.......found this link in 30 seconds, on page 16 it tells you what to hook up to that wire......

There seems to be a lot of questions like this......if you don't have the original manual Google is your first "Go-To" source.....

HTH

 

thanks i think i was to lazy to read lol =p

 

Blue and white is industry color code for amp turn on if it had blue and blue and white...I'd blue only then blue....some times in a rare case you will fine a off brand of old deck that isn't following code. But its ez to put a test light on it and turn on deck.

 

you could also use the ACC line that turns your deck on.

 

thanks guys! i might get my amp in February. I just want to make sure and not make any mistakes =) (safe side )

 

Then when you're ready, PM myself or 420guy.....we'll keep you away from the dark side......

HTH

 

Good advice right there. LOL