which PA amp is better?
#1
I'm thinking of going with a Gothic OV2-1600 for the subs with an OV4-800 for my speakers. Does anyone know if the LT Series is better though? Here are the specs on the amps I'm trying to decide between, I can get either for the same price :
Power Acoustik Gothic OV2-1600
Briged Max: 1600 Watts
Mono RMS: 740 Watts
2 Ohm RMS: 370 x 2 Watts
4 Ohm RMS: 310 x 2 Watts
Super Cool Blue LED
Chrome Top Plate Panel
Full MOSFET PWM Power Supply
Full Selectable Crossover Hi/Full/Low
Three Way Protection Circuit
Tri-Mode Capable
Variable Low Pass 40Hz-120Hz
Variable Hi Pass 150Hz-1.5Khz
18dB Bass Boost @ 40Hz.
Frequency Response: 10Hz to 30Khz
S/N Ratio: 97 db
THD: 0.02%
2ohm Stable Stereo
System Distress Indicator
High/Low Level inputs With Floating Ground
4 Gauge Power/Ground Connection
Gold plated RCA Connectors
Line output
Dimensions: 22'' x 11.25'' x 2.25''
and
Power Acoustik LT1920/2
Full Mosfet PWM Power Supply
Full Selectable Crossover Hi/Full/Low
Three Way Protection
2 Ohm Stable Stereo
Tri-Mode Capable
System Distress Indicator
4 Guage Power/Ground Connection
Diamond Cut Heat Sink
Gold Plated RCA Connectors
Line Output
Top Control Panel
Variable Low Pass 30Hz-500Hz
Variable Hi Pass 50Hz-500Hz
Variable 24 dB Bass Boost
Variable Subsonic Filter 60Hz-200Hz
Frequency Response: 10Hz to 30KHz
370W x 2 @ 4 Ohms
440W x 2 @ 2 Ohms
880W Mono RMS
1920W Bridged Max
S/N Ratio: 98 dB
THD: 0.02%
Dimensions (W x H x D): 22" x 2.25" x 11"
Power Acoustik Gothic OV2-1600
Briged Max: 1600 Watts
Mono RMS: 740 Watts
2 Ohm RMS: 370 x 2 Watts
4 Ohm RMS: 310 x 2 Watts
Super Cool Blue LED
Chrome Top Plate Panel
Full MOSFET PWM Power Supply
Full Selectable Crossover Hi/Full/Low
Three Way Protection Circuit
Tri-Mode Capable
Variable Low Pass 40Hz-120Hz
Variable Hi Pass 150Hz-1.5Khz
18dB Bass Boost @ 40Hz.
Frequency Response: 10Hz to 30Khz
S/N Ratio: 97 db
THD: 0.02%
2ohm Stable Stereo
System Distress Indicator
High/Low Level inputs With Floating Ground
4 Gauge Power/Ground Connection
Gold plated RCA Connectors
Line output
Dimensions: 22'' x 11.25'' x 2.25''
and
Power Acoustik LT1920/2
Full Mosfet PWM Power Supply
Full Selectable Crossover Hi/Full/Low
Three Way Protection
2 Ohm Stable Stereo
Tri-Mode Capable
System Distress Indicator
4 Guage Power/Ground Connection
Diamond Cut Heat Sink
Gold Plated RCA Connectors
Line Output
Top Control Panel
Variable Low Pass 30Hz-500Hz
Variable Hi Pass 50Hz-500Hz
Variable 24 dB Bass Boost
Variable Subsonic Filter 60Hz-200Hz
Frequency Response: 10Hz to 30KHz
370W x 2 @ 4 Ohms
440W x 2 @ 2 Ohms
880W Mono RMS
1920W Bridged Max
S/N Ratio: 98 dB
THD: 0.02%
Dimensions (W x H x D): 22" x 2.25" x 11"
#8
I emailed them about 10 times to find out something simple like the fuse sizes *how many and no one ever got back to me on it...I even called and was told someone would email/call you back never happend, so I figured forget it then I was looking at the OV2-1200 I think may have been the 1600.
Thread
Thread Starter
Forum
Replies
Last Post
catalyst007
General Discussion
5
08-07-2007 02:42 PM
Audiofool
General Discussion
3
04-25-2007 03:41 PM