Hey I searched CCA and Google, no dice. My GM-H100 is missing the three wire remote lead harness, anyone know which one of the three terminals I can hook the remote lead up to? Thanks!!

 

Took it apart, on the circuit board the terminals are labelled B REM, ACC, and ILM. If I tap a wire off my power supply from the + 12v over to the REM terminal it would turn on? Or would I need to hook up the ACC one also, to an ignition source, when I hook this up in my car? Any old school cats remember? Thanks!!

[ January 08, 2005, 08:33 PM: Message edited by: Jeepbeats ]

 

hook B REM and ACC together. i cant for the life of me remember what ILM does, or is for.

 

Cool thanks. Tried that, it turned on fine, the RED power LED is working, just need to test it in my truck tomorrow and see if I can get some sound out of it.

 

Thanks Paul. Tested it out in the truck, nice amp, pretty clean power. Nice to be able to choose the bass boost frequency, also. [img]graemlins/headbang.gif[/img]

 

i didn't know anyone had those anymore...i had a GM-H50 for a rear fill amp before, it did the trick..sorry i was late to the punch on helping you out, at least you got it going though

 

I still have a GM-H50...What a tank... Although it only delivered 2x25W into 4 ohms, they were capable of running 2 ohms mono which gave you around 180W. It was perfect for my JBL DVC 10". I paid next to nothing for it and it was awesome.

I'm always looking for another 2 or 3. From previous posts I believe the H100 uses the same board as the H50 but uses a larger heatsink.

 

MQqball I just picked this one up, it is mint. In nice shape cosmetically and it pushes my Infinity components very cleanly. PM me if you are looking to pick one up.....

Ross

 

i have the same amp GM H100 and i was wondering if any one had any decent pics of the amp so i could figure out what the 3 controls are and i am tryin to under stant the 3 wire hookup i am to connect the acc to the b-rem does the acc have power or am i too hook up the remote from the deck thankyou