95BlackZ28

If an amp calls for an 8 gauge wire can it be damaged if you run a 4 gauge with a reducer to an 8 gauge. My question is will it draw to much power. Just some background my mono amp requires a 0 gauge power feed, but my speaker amp can only accomodate an 8 gauge power feed. So I only want to run 1 wire from the battery into a distribution box, but I can't find one that has a 0 gauge input to 0 gauge output and and 8 gauge output. There seems to only be 0 gauge input to 0 gauge output to 4 gauge output.

JRSTAR

the wire itself will not draw any power, it's the amp itself that draws the power so yes this setup will do just fine. Good luck

M.C. Ryan

Going with a larger wire never hurts... it's only a bad thing if you go with too small of a wire... so if it requires an 8 ga wire and you use a 10... that is not suggested.

95BlackZ28

Thanks, guys