General Discussion General discussion about all things car audio, from pioneer, orion, alpine and eclipse.

Sub question

Old Dec 22, 2006 | 12:23 PM
  #1  
eddie_j's Avatar
Thread Starter
0 Watt CAFz'r
 
Joined: Aug 2006
Posts: 16
Sub question

I am a total noob at audio stuff....but I like how its sounds so....its a learning process...haha

I have a question about types of subs....

I'm running a Kenwood KAC 929 amp....which is 1000W max and i think 400W rms....

Whats the difference between 2-ohm and 4 -ohm subs? and which one should i be getting for this amp?

I currently have 2 12" earthquake subs in my car but I have no idea what kind of ohm they are.....one blew recently and I'm looking to replace it....want to get the right sub kind....

thanks
Old Dec 22, 2006 | 01:16 PM
  #2  
Tom.F.1's Avatar
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Feb 2006
Posts: 1,217
That amp is rated 460 watts x 1 into 4 ohms, so what you need is two 2 ohm subs in series, for a 4 ohm load. They'd each get 230 w.
OR, one 4 ohm sub that will take all 460 w.
Old Dec 22, 2006 | 01:28 PM
  #3  
PistonHead's Avatar
50 Watt CAFz'r
 
Joined: Jan 2001
Posts: 229
Eddie J

According to Kenwoods website that amp is rated as follows.

150w x 2 @ 4 Ohms

or bridged
460w x 1 @ 4 Ohms

It does not appear to be stable @ 2 Ohms when bridged.

So you either need two single voice coil 2 Ohm subs wired in series @ 4 Ohms

or

Two dual voice coil 4 Ohm subs wired @ 4 Ohms.



This is assuming you want to keep 2 subs.

Hope that helps.
Later,
Brad
Old Dec 22, 2006 | 01:29 PM
  #4  
PistonHead's Avatar
50 Watt CAFz'r
 
Joined: Jan 2001
Posts: 229
Looks like I took to long writing that last post. You beat me to it Tom !!!

Old Dec 22, 2006 | 04:14 PM
  #5  
eddie_j's Avatar
Thread Starter
0 Watt CAFz'r
 
Joined: Aug 2006
Posts: 16
thanks for the replies guys......

so just to clarify...what rms subs of each type can I get

2 ohm 300 W rms single coil?

and 4 ohm 500W double coil?

is that right?
Old Dec 23, 2006 | 11:42 AM
  #6  
eddie_j's Avatar
Thread Starter
0 Watt CAFz'r
 
Joined: Aug 2006
Posts: 16
BUMP!....

anyone that can answer the above question....
Old Dec 23, 2006 | 12:51 PM
  #7  
Tom.F.1's Avatar
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Feb 2006
Posts: 1,217
You need a 4 ohm load and you'll get 460 watts RMS.

2, 2 ohm subs 250 w rms each.
0r
2, 4 ohm dvc, 250 w rms ech.
Or
1, 2 ohm dvc, 500 rms
Or
1, 4 ohm
Old Jan 13, 2007 | 12:57 PM
  #8  
eddie_j's Avatar
Thread Starter
0 Watt CAFz'r
 
Joined: Aug 2006
Posts: 16
Hey guys,

A followup here.....I have been looking around at suitable choices very carefully......

so far there seems to be a concensus from audio shops that Clarion is a bad brand to go with...lol

So my question is......with my amp, is 2 Alpine type S's (SWS-1222D) the right subs for me?

they are dual voice....but they are 2-ohm....would this be compatible coz thats what one audio shop recommended.
Old Jan 13, 2007 | 02:49 PM
  #9  
Brad-S.A.'s Avatar
2000 Watt CAFz'r
iTrader: (35)
 
Joined: Jan 2005
Posts: 2,195
Who says Clarion is bad?? A shop that does not carry them. They perform better then most and just as good as a pioneer, Kenwood ect. With that amp just get one PXW1051 or PXW1251 for under $150 taxes in and you will be all good.
Old Jan 13, 2007 | 07:40 PM
  #10  
BigRedGuy's Avatar
2000 Watt CAFz'r
iTrader: (11)
 
Joined: Nov 2000
Posts: 2,383
Talking

/\ ...what he said....

Clarion doesn't aim for the SPL records....their stuff will get loud enough to damage your hearing while still sounding good.

From what I've seen, they are heading into the in-car entertainment scene in a big way....it takes a pretty decent quality system to go for THX certification and that includes bass.

HTH

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:58 AM.