jerod187

Hey guys im ordering a new kicker l7 and it will be going in a ported box and i will be powering it with a kicker zx 1000 or zx1500 havent decided yet and i will be running it off a pioneer deh 5900 and i am not sure what to get the 4 or 2 ohm model i want what ever would be best for my application and ap thanks, jeremy

Sasha

iTrader: (10)

Dual 4, so you can run it at 2 ohms, and get full power out of your Kicker amp.

jerod187

ok thx wuts the advantage of 2 ohm?

kutchdawg

if you get a dual 2 ohm config you'll be able to run with an amp at a 1 ohm load. Really no advantages of either . Just depends on what amp you plan on getting and if it will run the recommended power at whatever impedance your sub is wired to.

Tom.F.1

iTrader: (1)

Subs have to match the amp.

If you get the KX1500, you need two dvc2 to get 1500 w rms @ 2 ohm.
If you get the TX1505D, you need two dvc4 to get 1500 w rms @ 1 ohm.

Tom.F.1

iTrader: (1)

Subs have to match the amp.

If you get the KX1500, you need two dvc2 to get 1500 w rms @ 2 ohm.
If you get the TX1505D, you need two dvc4 to get 1500 w rms @ 1 ohm.

Oops, sorry. Hit submit twice by mistake.

Sound_Deamon

If these are your choices of subs / amps and do not want to go with something better then in this case ...

1 x dvc 2 ohm on the 1500

jerod187

well what would you suggest for a reasonable prics for something thing that would be as good or better?

Sound_Deamon

depends on what your budget is like .... i'm sure you can find better ... let me know i'm sure i or others can help you choose

AyZe

IF ure talking ZX 1500.1 dont go dvc 2 ohm or ure gonn be stuck with 4 ohm or protect, i kno from exp.