The cargo panda from Winnipeg
#23
Guest
Posts: n/a
Thats cool just trying to gain knowledge about other peoples product im not making comparison. Thanks for all your answers and good luck with your build i hope to have test results on 16v from our 1100.1 we are hoping it is in the 15-16 k range on 16v because in theory we should get 10% more output per 1volt input.
#24
Guest
Posts: n/a
Don you need to go back to Ab amplifiers if you want to make power at that load. lol Trust me i still think USamps 2000x was the best amp ever built or zapco 9.0. Back in the day i clamped 128v and 36amps at 14.80v from 1 us2000x starting at 1.8 rising to 3.4 if im not mistaken. The other good thing was the way it worked with my Strokers it was a match made in heaven the sub had so much more control due to the high dampaning fator compared to these class d amps. Sub with a high BL and amp with a high dampaning factor is such a great combo.
#25
Thats cool just trying to gain knowledge about other peoples product im not making comparison. Thanks for all your answers and good luck with your build i hope to have test results on 16v from our 1100.1 we are hoping it is in the 15-16 k range on 16v because in theory we should get 10% more output per 1volt input.
#26
Guest
Posts: n/a
Would they see more if amps rise was at 1ohm or do those have to see 2ohm after rise. What people dont understand is the 1100.1 is a hopped up version of a 7k board and is the same as 9k amplifiers we used that rating because we already had a 1000.1 so why come out with a 900.1 amp.
Last edited by dar0088; 07-02-2010 at 01:42 AM.
#28
Don you need to go back to Ab amplifiers if you want to make power at that load. lol Trust me i still think USamps 2000x was the best amp ever built or zapco 9.0. Back in the day i clamped 128v and 36amps at 14.80v from 1 us2000x starting at 1.8 rising to 3.4 if im not mistaken. The other good thing was the way it worked with my Strokers it was a match made in heaven the sub had so much more control due to the high dampaning fator compared to these class d amps. Sub with a high BL and amp with a high dampaning factor is such a great combo.
#29
Excuse me, how do you know that your amps will make more power than his Stetsom 7k2 at higher impedance load? His amplifiers have around 160V on the power supply, and your amp being a half bridge design would have to have 320V in order to have similar power at 4 ohms, so, what is the voltage on your amp's power supply?
#30
Guest
Posts: n/a
This is wack i wish i could have my own account on here again its threades like this and discussions that i miss. The stuff i dont miss is all the bs and bashing. This is my cousins girlfreinds account and she is away in vegas until the 17th so i feel free to use it but really dont want to get her banned from the site. The thing is i have been on this site since 2000 or 2001 and there is good people and people with alot of knowledge to have good chats with. Then there is others that are waste of life who **** it up for everyone.