Just wondering if anyone could help me?I have 2 rockford fosgate t10001bd monoblock amps and 2 t212 dvc dual 2 so everything is hooked up now how do i get the volume of both amps equal per sub people are telling me its not just a matter of raising the gains on the amp theres more involved.

 

there should be a slave option on the amp that you can turn on besides that i dont know if the gains has to be the same

 

yep i know. the master and the second amp they call the slave anything else ?

 

not sure the last time i used two amps for subs i tryed to match the gains as close as possible while having one amp as slave so i gets the same frequency

 

You can find a ton of info including owners/install manuals at www.rockfordfosgate.com

 

what he said^^^

are you starpping the amps together? if you are then the settings on the slave should not matter. its all controlled by the master. if you are not strapping, then you need to level match using a multimeter. you measure it on the speaker outputs of the amplifer.

 

multimeter!

 

Ok father yuli using a multimeter what should i put the setting on and do i disconnect the subs .also do i raise the volume on the deck or does that not matter .