hifonics vs. soundstream
#1
hifonics vs. soundstream
so i got two amps im having a hard time decided on:
HIFONICS BXI-2607D
2,600 WATT Mono Block Class "D" Monster Subwoofer amplifier
2,600 x 1 RMS @ 1 ohm
1 ohm stable
1,700 watts @ 2 ohms
Mosfet power outputs
RCA Outputs
Advanced Class Super "D" Setup
All new efficient Heatsink Design
Hifonics Logo Illuminates in bright neon illumination
Power and Protection LED indicator
Gold RCA Inputs
Daisy Chainable (you can connect 2 amps and get double the power together)
Built in advanced crossover system
Balanced line inputs
Soft Start Turn on for extra long lasting amplifier protection
Subsonic bass filtration system
Low Pass Filter: 35 - 240 Hz (24 Db PER OCTAVE)
Bass Boost: 0 - 18 dB
Phase Shift: 0 - 180 degrees
24 dB Subsonic Filter (15 - 50 Hz)
Dimensions: 16.5" L x 10.39" W x 2.63" H
S/N Ratio: >95dB
THD: <0.08
Frequency Response: 2-250 HZ
Requires 2 gauge power and ground leads (0 or 2 gauge amp kit)
SOUNDSTREAM PCX2000D
RMS Power @ 4 ohm: 1100W x 1
RMS Power @ 2 ohm: 1500W x 1
RMS Power @ 1 ohm Mono: 2000W x 1
TSTTM (Twin Stack Technology) Allows 2 amplifiers to power single load
FR4 Circuit Board
Mono-block Mosfet Class D Circuitry
Continuously Variable Low-Pass Crossover
Continuously Variable Subsonic Filter
Variable 18dB Bass Boost
Platinum RCA and Power Inputs
1 Ohm Stability
Accepts up to 16V DC Power Input
Glossy Black Hairline Anodized Heatsink
End Caps for Professional Installation
THD: 0.50%
S/N ratio: >85
Damping Factor: >200
Input Sensitivity: 200mV-8V
Subsonic Slope: 24dB
Subsonic (Hz): 15 - 40
Low Pass Filter(Hz): 50 - 150
Low Pass Filter slope: 24dB
Subwoofer EQ.: 0-18dB
Phase (degree): 0 - 180
Remote Bass Boost Control included
Dimensions:10"(W)x2.5"(H)x22.2"(L)
the hifonics amp says it is made to be easy on your electrical system which is good but im not really sure about the amp its self because i have heard anything about them. i have always heard soundstream amps were well built but haven't tried there mono amps personaly.
just looking for any input on these amps if anyone has some. thanks.
HIFONICS BXI-2607D
2,600 WATT Mono Block Class "D" Monster Subwoofer amplifier
2,600 x 1 RMS @ 1 ohm
1 ohm stable
1,700 watts @ 2 ohms
Mosfet power outputs
RCA Outputs
Advanced Class Super "D" Setup
All new efficient Heatsink Design
Hifonics Logo Illuminates in bright neon illumination
Power and Protection LED indicator
Gold RCA Inputs
Daisy Chainable (you can connect 2 amps and get double the power together)
Built in advanced crossover system
Balanced line inputs
Soft Start Turn on for extra long lasting amplifier protection
Subsonic bass filtration system
Low Pass Filter: 35 - 240 Hz (24 Db PER OCTAVE)
Bass Boost: 0 - 18 dB
Phase Shift: 0 - 180 degrees
24 dB Subsonic Filter (15 - 50 Hz)
Dimensions: 16.5" L x 10.39" W x 2.63" H
S/N Ratio: >95dB
THD: <0.08
Frequency Response: 2-250 HZ
Requires 2 gauge power and ground leads (0 or 2 gauge amp kit)
SOUNDSTREAM PCX2000D
RMS Power @ 4 ohm: 1100W x 1
RMS Power @ 2 ohm: 1500W x 1
RMS Power @ 1 ohm Mono: 2000W x 1
TSTTM (Twin Stack Technology) Allows 2 amplifiers to power single load
FR4 Circuit Board
Mono-block Mosfet Class D Circuitry
Continuously Variable Low-Pass Crossover
Continuously Variable Subsonic Filter
Variable 18dB Bass Boost
Platinum RCA and Power Inputs
1 Ohm Stability
Accepts up to 16V DC Power Input
Glossy Black Hairline Anodized Heatsink
End Caps for Professional Installation
THD: 0.50%
S/N ratio: >85
Damping Factor: >200
Input Sensitivity: 200mV-8V
Subsonic Slope: 24dB
Subsonic (Hz): 15 - 40
Low Pass Filter(Hz): 50 - 150
Low Pass Filter slope: 24dB
Subwoofer EQ.: 0-18dB
Phase (degree): 0 - 180
Remote Bass Boost Control included
Dimensions:10"(W)x2.5"(H)x22.2"(L)
the hifonics amp says it is made to be easy on your electrical system which is good but im not really sure about the amp its self because i have heard anything about them. i have always heard soundstream amps were well built but haven't tried there mono amps personaly.
just looking for any input on these amps if anyone has some. thanks.