Originally Posted by Lord Huggington
(Post 631982)
Is the port at the back or below the subs, forewards?
|
Originally Posted by JL Stomper
(Post 631674)
The pic of the welder and its settings was taken on purpose for Murilo. He had to use the Utube to learn how to use one :) and still I remeber he was still having issues.
attached I showed him what them are supposed to look like :) and he claimed they mean nothing till it breaks a 60. so in the one pic it shows a 160... lmao. The worst part was buffing that rust off, I had purchased the steel a year ago and after i decided to ditch that blazer it sat outside for 7 or 8 months till was put into this build. Grinding the rust off the tubes outside at -10C, just another day, hehe. Back then I only knew how to use the stick welder, I guess is too old-school for you? :cheeky4: When you find some torque on this gas-guzzler you can come here in Winnipeg for some testing. (told you to buy the 6.5L) |
Originally Posted by Soundigital
(Post 632100)
Haha nice!
Grinding the rust off the tubes outside at -10C, just another day, hehe. Back then I only knew how to use the stick welder, I guess is too old-school for you? :cheeky4: When you find some torque on this gas-guzzler you can come here in Winnipeg for some testing. (told you to buy the 6.5L) Ya the 6.5 might better on fuel but I thunk I got more. Horses from this gas pot As for amp test ya it is sMe one and it must very well be a meter issue cuz those who have sd know that emf causes some inaccurate readings , but none the less I think the output is correct as there was alot of volume left on tunes Before clip lite come on |
Originally Posted by Lord Huggington
(Post 631982)
Is the port at the back or below the subs, forewards?
Mine I had posted to earlier that it isnported at rear of box 42 wide X 6.5 or so Tuned to 30? But the shell deff has an effect not tuning and hens the flat response |
Only from sask would the only suburban dually come..........
some how i cant say im overly surprised tho.... nice truck + build .:thumbsup: |
VERY nice build brotha cant wait to see what kind of numbers she puts up.
|
Originally Posted by JL Stomper
(Post 632260)
Well boy, I probably learned stick when you were a twinkle in your dads eye, but you must know by now mig/tig is like SD
When your coming down for some test/tuning let me know!!! I got the Corona's waiting and Murilo better get that damned fridge going in his shop!! :smilie_da |
[QUOTE=JL Stomper;632261]:sly:
is this another pffffffff thread? ;) |
[QUOTE=ddking69;632871]
Originally Posted by JL Stomper
(Post 632261)
:sly:
is this another pffffffff thread? ;) |
Well santa brought me some 3/4 X 1.5" flat for christmas. And I was alone at shop today and so between answering phones and sending guys out I managed to get one set drilled for top posts, drilled and tapped to anchor to top post and got 12 connections drilled and tapped. If I am lucky this weekend I will get a good start on the new year.... I have 6 lenths of 1X1 tube left to install, and hope that sunday will dispose of it. Pixs to come mid next week. If goes my way !
|
All times are GMT -5. The time now is 05:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands