SUB BOX BUILD "HELP!!!!!"
#1
ok, so i had a design made in bassbox pro, and the vent length puts the box volume way too big.
i have 16" wide by 32" long by 20" deep to work with.
according to bassbox 6, the vent needs to be 14" in length, plus the distance from the back of the vent to the back of the box(i assume its 8"
in order to get the proper volume, i would need to make the box 10" deep.
I wish i could show a diagram of what i mean, but if someone could make me another schematic with bassbox based on the dimensions i have to work with it would be a huge help.
16"x32x"20" of space to work with,using 2 kicker s10l72 (dual 2ohm) and 2 concept cd2410's wired in .5ohm stable with both amps strapped.(will the amps hold up?)
thanks for any immediate help guys, sound comp is saturday.
i have 16" wide by 32" long by 20" deep to work with.
according to bassbox 6, the vent needs to be 14" in length, plus the distance from the back of the vent to the back of the box(i assume its 8"
in order to get the proper volume, i would need to make the box 10" deep.
I wish i could show a diagram of what i mean, but if someone could make me another schematic with bassbox based on the dimensions i have to work with it would be a huge help.
16"x32x"20" of space to work with,using 2 kicker s10l72 (dual 2ohm) and 2 concept cd2410's wired in .5ohm stable with both amps strapped.(will the amps hold up?)
thanks for any immediate help guys, sound comp is saturday.
#5
Guest
Posts: n/a
Are you not building htis at work? Your installer does not know how to bend a port or design a box?
1. Put the vent on a different side (not a favorite option for me)
2. Make the vent narrower and thus shorter (might not be an option depending on the area it already is)
3. Bend the port. <- would be my choice.
1. Put the vent on a different side (not a favorite option for me)
2. Make the vent narrower and thus shorter (might not be an option depending on the area it already is)
3. Bend the port. <- would be my choice.
#6
well he's leaving because of personal reasons. so yeah but good thingis he's going to build me a box afterall so I'm happy but it's cuttin this down to the wire..... I'm gonna have to do a lot of midnite runs to sev these next 3 days.... and never mind the test runs.... YESSSSS!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
livent
Enclosure Design & Construction Help
13
11-16-2010 09:23 AM