Amp install issue? Sub volume/ speaker fading. Please help.
01-05-2011, 07:30 PM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Dec 2010
Posts: 25
Amp install issue? Sub volume/ speaker fading. Please help.
Hey guys i got my system installed today and something doesn't sound right.. Ill start off by telling you what im running. HU is a kenwood X494 excelon, amp 4 channel XR4S kenwood running front 6.5" components in the doors on the first channel.. The other channel is running a small 10 inch sub DVC 2ohm, wired for 4 ohm.
The problem im having is the sub volume control doesn't really work, when its on 0 the sub works but not very loud. When i turn up the sub volume the left components get louder, and when i turn down the sub volume the left side speakers get quieter, pretty much turn off. Sub volume does not really control the sub perfomance. Also when i turn sub off using the feature on my deck the left side sound turns off. Also when i fade all the sound to the rear all the sound goes to the left side door?
Something is obviously wrong, would like to get your input thanks.
The problem im having is the sub volume control doesn't really work, when its on 0 the sub works but not very loud. When i turn up the sub volume the left components get louder, and when i turn down the sub volume the left side speakers get quieter, pretty much turn off. Sub volume does not really control the sub perfomance. Also when i turn sub off using the feature on my deck the left side sound turns off. Also when i fade all the sound to the rear all the sound goes to the left side door?
Something is obviously wrong, would like to get your input thanks.
Last edited by Salm; 01-05-2011 at 07:40 PM.
01-05-2011, 09:41 PM
#3
50 Watt CAFz'r
Join Date: Oct 2006
Posts: 217
Yeah, the RCAs are in the wrong order. Sounds like left and sub need to be switched around.
It could also be a 2-way/4-way switch is turned to the wrong setting, but I'm not sure if that would do what your describing off hand. Worth a look.
It could also be a 2-way/4-way switch is turned to the wrong setting, but I'm not sure if that would do what your describing off hand. Worth a look.
01-05-2011, 10:08 PM
#4
Hey guys i got my system installed today and something doesn't sound right.. Ill start off by telling you what im running. HU is a kenwood X494 excelon, amp 4 channel XR4S kenwood running front 6.5" components in the doors on the first channel.. The other channel is running a small 10 inch sub DVC 2ohm, wired for 4 ohm.
The problem im having is the sub volume control doesn't really work, when its on 0 the sub works but not very loud. When i turn up the sub volume the left components get louder, and when i turn down the sub volume the left side speakers get quieter, pretty much turn off. Sub volume does not really control the sub perfomance. Also when i turn sub off using the feature on my deck the left side sound turns off. Also when i fade all the sound to the rear all the sound goes to the left side door?
Something is obviously wrong, would like to get your input thanks.
The problem im having is the sub volume control doesn't really work, when its on 0 the sub works but not very loud. When i turn up the sub volume the left components get louder, and when i turn down the sub volume the left side speakers get quieter, pretty much turn off. Sub volume does not really control the sub perfomance. Also when i turn sub off using the feature on my deck the left side sound turns off. Also when i fade all the sound to the rear all the sound goes to the left side door?
Something is obviously wrong, would like to get your input thanks.
If if he is and he just works there, you need to take the car back and get the owner to have a listen....when he does he may take care of your wiring and the installer.....you can hope....
It sounds like he has mixed up the RCAs at the back of the deck (for starters) and maybe elsewhere as well, but you can figure it out if you can get the deck out. If you are comfortable with this idea good, if not you need to take it to someone who is.
If you're on your own, reply back here and I will try and walk you thru the troubleshooting process.
HTH
01-05-2011, 10:11 PM
#5
0 Watt CAFz'r
Thread Starter
Join Date: Dec 2010
Posts: 25
Wow man you would think when you pay people your hard earned money that they would do a good job! Few ppl on this board referred me to this shop, and Im not impressed at all! System should be fully tested before it goes out, it obviously wasn't. I'm going back there tomorrow ill let you know what happens..
Thanks guys for all the help, your always helpful.. Happy new year to everyone.
Thanks guys for all the help, your always helpful.. Happy new year to everyone.
01-05-2011, 10:14 PM
#6
50 Watt CAFz'r
Join Date: Oct 2006
Posts: 217
People make mistakes.
If they warranty it then yeah you've lost a little time and that's too bad. But as an installer myself I can't stand seeing these people above jumping down the throat of the installer without even knowing any details about the install.
If they warranty it then yeah you've lost a little time and that's too bad. But as an installer myself I can't stand seeing these people above jumping down the throat of the installer without even knowing any details about the install.
01-05-2011, 10:16 PM
#7
0 Watt CAFz'r
Thread Starter
Join Date: Dec 2010
Posts: 25
There lots of other places around, im located in Hamilton. I went to this place because i heard good things from members on this forum, well see what happens tomorrow. Ill let you guys know.
Last edited by Salm; 01-06-2011 at 04:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
avidedtr
Install related
14
12-27-2011 07:22 PM
