General SQ General discussion of Sound Quality related issues.

(ASAP opinion) Will an HO BOX make my 10w6v2 sound better than...

Thread Tools
 
Search this Thread
 
Old 08-06-2009, 03:55 PM
  #1  
50 Watt CAFz'r
Thread Starter
 
D113's Avatar
 
Join Date: Jun 2009
Posts: 82
(ASAP opinion) Will an HO BOX make my 10w6v2 sound better than...

......the generic slightly larger than spec sealed box it's in now?

Is it a relatively flat box ?

let me know asap!! pull the trigger tomorrow.
D113 is offline  
Old 08-06-2009, 05:12 PM
  #2  
2000 Watt CAFz'r
iTrader: (3)
 
veeman's Avatar
 
Join Date: Nov 2004
Posts: 2,455
i assume you're asking about the JL HO box vs. a regular sealed box? can't say if it'll sound better as that's pretty subjective, but it will be louder.
veeman is offline  
Old 08-06-2009, 07:06 PM
  #3  
Administrator
 
Dukk's Avatar
 
Join Date: Feb 2006
Posts: 16,855
Although a subjective topic, vented always sounds better
Dukk is offline  
Old 08-06-2009, 09:03 PM
  #4  
Yankee
 
JohnVroom's Avatar
 
Join Date: Oct 2003
Posts: 3,599
^^^And I will have to say what I usually say, it is easier to get good sound from a sealed box than a ported one.

In an ideal word we build a box to perfectly match the driver and the car in question. Then the sealed vs vented argument is a real battle.

Reality slams the woofer in a box, and a prefab is probably the wrong size with the wrong port length. A sealed will sound better more often in those circumstances.
JohnVroom is offline  
Old 08-06-2009, 10:01 PM
  #5  
50 Watt CAFz'r
Thread Starter
 
D113's Avatar
 
Join Date: Jun 2009
Posts: 82
I appreciate what you're saying. I've heard a lot of good things about it but tomorrow I'll try it and see if it's enjoyable for my type of musical tastes.
D113 is offline  
Old 08-06-2009, 10:12 PM
  #6  
0 Watt CAFz'r
iTrader: (1)
 
hheatt's Avatar
 
Join Date: Jul 2008
Posts: 28
I love my H.O. box sounded great pounded hard!

I dont like sealed i find there not loud very tight sounding...not my thing!

Most people go with ported ive had a few people go with sealed and were very disappointed!
hheatt is offline  
Old 08-07-2009, 03:21 PM
  #7  
Administrator
 
Dukk's Avatar
 
Join Date: Feb 2006
Posts: 16,855
Lightbulb

Originally Posted by JohnVroom
^^^And I will have to say what I usually say, it is easier to get good sound from a sealed box than a ported one.
I would rather say: "It is easier to mess up a vented box than a sealed one."

But then that's the risk when chasing superior performance
Dukk is offline  
Old 08-08-2009, 09:34 AM
  #8  
50 Watt CAFz'r
Thread Starter
 
D113's Avatar
 
Join Date: Jun 2009
Posts: 82
So I swapped into a HO Box.

Wow.. this was definitely the rigth decision for may musical tastes.

The 10w6v2 still hits hard and clean, but I now have a ton of headroom that I didnt in my previous box. The lows are coming through much stronger now.

Can anyone answer a few questions for me though?

I asked my installer about the proper "infrasonic filter" setting to use now that i'm not in a sealed box, and could face the potential of unloading.

They said, just set it at about 22hz because below that you aren't going to hear it. However someone i've been speaking to who used to own Eastern Ave's shop says, set it to just below the port's tuned frequency because below it you essentially have "no box" and could run into unloading issues.


Who's right here? The gap from 22hz to 35ish hz is pretty big!
D113 is offline  
Old 08-08-2009, 11:02 AM
  #9  
MTT
--SPECIAL ED--
iTrader: (17)
 
MTT's Avatar
 
Join Date: Jul 2006
Posts: 1,325
Originally Posted by D113
So I swapped into a HO Box.

Wow.. this was definitely the rigth decision for may musical tastes.

The 10w6v2 still hits hard and clean, but I now have a ton of headroom that I didnt in my previous box. The lows are coming through much stronger now.

Can anyone answer a few questions for me though?

I asked my installer about the proper "infrasonic filter" setting to use now that i'm not in a sealed box, and could face the potential of unloading.

They said, just set it at about 22hz because below that you aren't going to hear it. However someone i've been speaking to who used to own Eastern Ave's shop says, set it to just below the port's tuned frequency because below it you essentially have "no box" and could run into unloading issues.


Who's right here? The gap from 22hz to 35ish hz is pretty big!
As usual, I'll recommend you try both and everything in between and decide for yourself which sounds better TO YOU, it's free, easy and you may just learn something in the process.

Don't let whats "supposed" to sound better limit you or your equipment.
MTT is offline  
Old 08-08-2009, 01:45 PM
  #10  
500 Watt CAFz'r
iTrader: (1)
 
Denonite's Avatar
 
Join Date: Dec 2008
Posts: 968
It's one of those variables you can change easily. If you don't like the way it sounds...just change the setting. You may find a setting you really like and keep it that way for years, then all of a sudden your musical taste changes and you have to change the settings or re-tune, re-arrange, or change equipment to satisfy your new taste. Point is, you have what you need to adjust the settings...your ears.
Denonite is offline  


Quick Reply: (ASAP opinion) Will an HO BOX make my 10w6v2 sound better than...



All times are GMT -5. The time now is 02:53 AM.