I'm running a 10" eclipse s7000 sub in a .75 cu sealed enclosure. I could get even smaller than that if i wanted a tighter sound, but The bass is currently perfect for what i like (sounds more like a 12 at lower volumes) Their 12" s7200 model would work perfectly, and runs on about 500wats RMS. Aluminum cone and a heavy build make it real accurate in the bass department. I'm a happy customer.
Would like to hear more about Eclipse's 6.5" aluminum 3way component system though if anyone has one?

 

...in addition... make sure your box is at LEAST 3/4" thick MDF or fiberglass, or a 12" sub will flex the hell ot of it and sound muffled and distorted.

 

MTT is correct, the DIYMA sub appears to be right up your alley. It likes a small enclosure, the power requirement is just about spot on. It is a very nice SQ sub, blends very nicely with the front stage.

 

the (diyma sub) made buy diymobileaudio, some one told me that the compagny is closed and wen i went to there web site and there is no product available ,
mabe im wrong but i think the other guy was write (it closed!)

 

there are still many kicking around for sale.

 

dang has them on ebay too. bad shipping option though, kinda expensive. finding one off someone is a better idea.

 

mi sub box is made of 3/4 inch plywood face and the box is made hove 3/4 oak

 

http://www.arcaudio.com/productdescription_pages/subwoofers/arc-series/arc12.asp
ARC12D4
Dual voice coil 4 ohm 350 watts rms / 700 peak

* One piece molded rubber surround
* High temp black anodized voice coil
* Progressive flat spider
* Extended bump plate

ARC 12D2
Impedance 1 or 4 ohm
Resonant frequency 21Hz
Sensitivity 89 db
RMS power handling 350 watts
Electrical "Q" .298
Mechanical "Q" 4.29
Total "Q" .278
Equivalent volume 4.76
One way linear 16 mm
Mounting depth 6"
Optimum sealed enclosure : .90 cuft
Ported enclosure : 1.30 cuft
ARC 12D2
Impedance 2 or 8 ohm
Resonant frequency 22Hz
Sensitivity 89 db
RMS power handling 350 watts
Electrical "Q" .317
Mechanical "Q" 4.35
Total "Q" .317
Equivalent volume 4.41
One way linear 16 mm
Mounting depth 6"
Optimum sealed enclosure : .90 cuft
Ported enclosure : 1.30 cuft


would be a good choice ?

 

If you can find a good price that sub would be a good choice.

 

yves

VALOR AUDIO VPA1005 5 CHANNEL 1200 WATT RMS (2,200 WATTS PEAK)


* 2200 Watt MAX 5-Channel Amplifier
* 4 x 100 + 1 x 400 Watts RMS @ 4 Ohm
* 4 x 150 + 1 x 600 Watts RMS @ 2 Ohm
* 4 x 300 + 1 x 1000 Watts MAX @ 2 Ohm
* Frequency Response: 20Hz - 40KHz / 30Hz - 180Hz
* Dimensions (L x D x H) 15.5" x 10 1/8" x 2 1/8"
* Class A/B Mosfet Circuitry
* 3-Way Circuit Protection
* Power and Protection Mode LED Light
* Adjustable Gain Control
* Built In Low Pass & High Pass Filter Crossovers
* Low and High Level Inputs
* Signal to Noise Ratio: 102dB
* Bridgeable

does any one no if this amp is any good for sq