I was wondering if I could get some advice on a box for my RE XXX 15” it will be seeing about 1200watts RMS from an Orion 1200D. I wanted to build a ported box but im not sure what size or what tuning frequency to use. I listen to a variety of different kinds of music but many of it has fast hard hitting beats such as trance, drums and bass, as well as some punk and heavy metal, with a little bit of rap thrown in, I was thinking of tuning it at 30herz.. does anyone have any plans i could use?

 

go to the re web site and it dose tell you how to build it i did used it for my xxx 15" sub but you have to tune the port a little bit so it's not that hard try it if not let me know and i'll help you out ....

 

4.5 cubes tuned to 28hz

 

i cant find the 15" sub box on their site, it only list the plans for a 10 and 12"

 

ok, i found a subwoofer box plan generator, however does anyone know the driver displacement on a 2005 xxx 15"?

 

as in Vd or as in the basket displacement?

 

it just says basic displacement in cubic feet

 

hmm, i think i have run into a problem.. i can only make the box a maximum of the following dimensions: 36" x 16" x 15" the box generator i was using wont work right with a box that small.. does anyone have plans similar to that size for a ported box?

 

you are either going to have to find a way to make a bigger box or but it in a sealed box

 

would 3.0 cubic feet at 28hz be ok for an xxx