AVH-P4400 backup cam help
02-09-2013, 03:48 PM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Feb 2013
Posts: 2
AVH-P4400 backup cam help
I have a pioneer AVHP4400BH installed and I also have a relay installed to use the dvd player while driving. I am having difficulty getting a backup camera to work. I am on the second back up camera and have verified the power going to the camera however I get no video.
My question is could the relay to bypass the parking brake and allow the video to work while driving confuse the HU and not allow the backup camera to work?
Other than that im at a loss... This is installed in a 2008 toyota tundra and im installing a TaoTronics TT-CC01 backup camera
My question is could the relay to bypass the parking brake and allow the video to work while driving confuse the HU and not allow the backup camera to work?
Other than that im at a loss... This is installed in a 2008 toyota tundra and im installing a TaoTronics TT-CC01 backup camera
02-12-2013, 10:32 PM
#3
What I did on my older pioneer unit was bypass the e-brake and connect the camera to the AV inputs. The unit I have allowed me to make my background the camera full time. I did this as I could not see behind me at all with the wall in the car, and I was simply too lazy to find the reverse hookup.
I believe on the pioneers they have a setting to select positive or negative signal for the camera wire (purple or pink wire I think). Check on that.
I believe on the pioneers they have a setting to select positive or negative signal for the camera wire (purple or pink wire I think). Check on that.
Thread
Thread Starter
Forum
Replies
Last Post
