|
It depends what vehicle. What you are getting is called alternator whine. Always check what is under the part of the body you are drilling into. You do not want to dril into your gas tank.
|
yeah make sure your well aware of what's around the hole above and beneth.... what kinda car is it???
|
Originally posted by tihuana82: I'm running 4 gauge power wires from battery to the distribution block. then two 8 guage wires, one going into amp 1( sony explode 500w max for 4 speakers), and the other going into amp2 (mtx blue thunder 280 max for sub). Then i ground the two amps separetly with 8 guage wires. If these info helps. |
I usually go through the wheel well...sometimes you can even tie into the frame which is good but not necessary....make sure no paint or rust on surface......and maybe check to see if the RCA's are run on the opposite side of the car from the power wire
|
Originally posted by tihuana82: So does anyone know how to get rid of the buzzing??? someone suggested that it was the power wire being too close to the RCAs, but i did run RCAs on one side of the car and Power wires on the other. Thanx for any help!!! [ September 18, 2005, 10:49 AM: Message edited by: BigBubba ] |
Originally posted by Garvok: I usually go through the wheel well...sometimes you can even tie into the frame which is good but not necessary....make sure no paint or rust on surface......and maybe check to see if the RCA's are run on the opposite side of the car from the power wire |
Originally posted by BigBubba: yeah make sure your well aware of what's around the hole above and beneth.... what kinda car is it??? I wanna make sure it'll work b4 i drill the hole. |
Find a spot above a frame rail... drill a hole...pop a bolt in and maybe some locktite and your laughin,....if its a unibody guess its hopeless, not too sure what type frame the cavelier have though
|
Better yet I got a better idea just run a second run straight to the battery and ground directly best all around way to go!!!
|
2 Attachment(s)
Attachment 26354
How's this spot to drill a hole?? Attachment 26355 It ends up here on the other side Please if someone will tell me if this will work |
| All times are GMT -5. The time now is 10:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands