mayhem

iTrader: (1)

installing this is my truck and have a question about brake bypass. watched some vid`s on how to do this but some say you need a relay, some don`t. now can i get away with this by hooking up the green wire on the grounds between the adapter harness and the deck harness or does it have to ground to the chassis and between the harness? whats the best method? thanx in advance.

Side Show

I suggest you put a switch in, it's actually illegal in most places to not have it hooked upto the handbreak

mayhem

iTrader: (1)

going 10k over the speed limit is illegal, and millions of people break that law every day. my question is can this be done without a relay or switch? to be honest, not really interested in watching while i`m driving i just want to install this as easy as possible.

Side Show

i used to just wire the handbreak wire in with the earth of the headunit/screen/deck in the demo board at work.... not too sure about the newer model pioneers tho. also being such a newish car it's prob worth testing it first on a test bench. (just to make sure it will work) apart from that i cant give you an answer soz

mayhem

iTrader: (1)

saw this vid:
seems that you can bypass via software by pressing the corning of the screen for a few seconds. gonna have to give it a try and seee what happens. thanks for the help.

Side Show

ohh cool, let us no if it works

mayhem

iTrader: (1)

installed it today. hooked up the green wire between the grounds in the harness, pushed the screen in the bottom left hand corner for around 15 seconds and it unlocked. easy peasy.

Side Show

too lubly