my box is for 2 12" subs, it has a port in the middle, with a "reverberation" port of some sort. anyways the recommended enclosure for my subs are both 0.5-1 cubic feet and each section for the subs are 10" wide, 13.5" deep and 12" tall

Think that'd make a big difference or would it still be alright?

 

The spec's you are missing are those for the port. This will determine the tuning frequency and the cross area. Without the dimensions of the port it is impossible to comment on the design of your enclosure. Also, did you build the box yourself or is it purchased from a manufacturer? As well I assume from your post that you are transferring from one box to another. The bottom line is, more information is needed. What kind of subs? What is are the spec's on the subs?

 

Alright thanks.

The subs themselves are Pioneer Premier TS-W3001D4's (3000w max/1000w rms) powered by the Hifonics brutus BXi2006D mono amp (going to be parallel @ 1ohm)

the box is made by obcon

12" - 14.0"H x 34.0"W x 15.5"D - 1.65 Cu Ft Air Space/Chamber



the port is 3" wide, 12" high and 13.5 Deep its hard to show the way the port is but i'll try to draw it.