partypeepers

Hello i recently found this site and wow i believe its going to help me install my alarm successfully. ok heres what im dealing with, Its a viper5704 alarm with the pkh34 bypass module and the 530t window module, for a 04 honda civic.
here is the questions for the harness in the alarm.

H1/4 White/Brown-Parking Light Isolation wire-Pin 87a Onboard Relay- (where do this 2 connect to?)
H1/5 White-Parking Light Output-

ok now Harness 2
Auxiliary/Shutdown/Trigger Harness 24 Pin Connector

H2/1-Pink/White (-)200mA Ignition/FLEX RELAY CONTROL OUTPUT- where does this go? and why does it say /FLEX RELAY CONTROL OUTPUT

H2/6-Green /(-)DOOR TRIGGER INPUT (N/C) OR (N/O)- If this is for the door trigger what does (n/c or n/o mean?)

H2/7-Black/Yellow /(-)200mA DOME LIGHT SUPERVISION OUTPUT- It doesnt give specific details but do i need to wire this up to a relay?

H2/8-Brown/Black / (-)200mA HORN HONK OUTPUT - Do I Just Connect This To The Negative Wire On The Factory Horn?

H2/10-Pink / (-)200mA IGNITION 1 OUTPUT - Does this just connect to my ignition?

H2/12-Violet / (+) DOOR TRIGGER INPUT -On the honda wiring it says the door trigger is (-) and on the alarm it says (+) can I still use this? Or how Do I connect this wire? And do connect both doors together in the same wire?

H2/18 - Violet/Yellow / (-)200mA Starter Output - What Do I connect This To?

H2/21 - White/Blue / (-)Remote Start / Turbo Timer Activation Input - Does this connect to anything?

H2/22 -Orange / (-)200mA Accessory Output - Whats Is This For?

Ok and at last.

Remote Star, 10-Pin Heavy Gauge Connector

H3/1 -Pink / (+)Ignition 1 Input/Output ignition switch, brown 7 pin plug, pin 6 goes to the wires at the ignition that show hot during key on also during starter crank.? and why does it say input/output?

H3/2 - Red/White / (+)Fused (30a)Ignition2 Relay Flex Input 87 - Is this only if you have 2 ignition or does this go connected somewhere?

H3/7 - Pink/White / (+)Ignition 2/ Flex Relay Output - what does it mean my flex relay output? where does this connect to? to i have to splice the ignition wire and connect one side to car side and the other to ignition side?

H3/8 - Pink/Black / (+)Flex Relay Input 87A Key Side( If Required )of Flex Relay- Where Does This Connect To? and once again what does flex relay mean?

H3/9 - Red/Black / (+)Fused (30A) Accessory/Starter Input- Does this needs to be hooked to a wire that is HOT during crank to not just ignition

Ok pretty much this is it. thats all the connections i have questions for. if you need any more info please let me know thanks. Also i want my car to have starter disable.. does this alarm already have it built inside? or do i need to add relays to it? thanks

HAM4864

Not to be an *** but if you need to ask where every wire goes to i think you should let the pros handle the job.
the wires are self explanatory
Do you have any wire diagrams for your car?
You can also read wiring diagrams and watch youtube videos.
I doubt any body will answer this question.
You should have went with the XK02- HODL

peelaudio

Go with pro, if you make a slight mistake with wiring this could end up costings you major money