Car Audio Technical Discussions Dedicated to the technical side of Car Audio.

'03 Sunfire - Head unit problems

Thread Tools
 
Search this Thread
 
Old 10-22-2010, 12:32 PM
  #1  
0 Watt CAFz'r
Thread Starter
 
eric.f241's Avatar
 
Join Date: Oct 2010
Posts: 1
'03 Sunfire - Head unit problems

Okay, here's the deal:
I've had a Panasonic head unit for the past year. It's worked in my '95 ford taurus then it was moved into my current '03 Sunfire.
I got the harness and the GM Class2 chime retention interface. I hooked it all together, soldered the wires together and protected them with electrical tape. Plugged everything together and it worked fine.
For a year it worked fine....
Then suddenly it started giving me issues like one day it wouldn't power on at all (when this happens I lose the door chime/key-in with door open chime, ect..). Then suddenly the following day it would work properly again, chimes and all.

The odd thing is that sometimes the unit will receive power but the chimes won't work. When in this state the head unit won't turn off when I open the driver door (It normally does when the chimes are working), so I eject the faceplate from the unit so its not brightly lit at nighttime from the LCD.
Anyways, it was in that state when I had it half-working last. I had to do some engine work on it so I disconnected the battery for a brief moment. When I reconnected it the head unit would not turn on (yet it was receiving power).

So to troubleshoot I went out and bought a new GM Class2 CRI, that didn't make a difference. Then next I bought a new head unit (Sony Xplod thing with iPod USB input... Seeing as i needed to upgrade from the old anyway, also assuming that the previous head unit was broken) and that too didn't make a difference. The new head unit receives power cuz I can hear the motor for the CD laser pinion track moving as soon as I plug the harness in, but I get nothing on the LCD display (even after resetting the head unit like the manual says.)!
This is super frustrating, I've tried just about everything I can think of to get this working... Fuses, checked. Wiring, checked. Whats even more annoying is that it used to work till problems started coming..

Anyways, I hope someone can help me. I'm compensating for no music with really crappy iPod speakers that run on 4 AA's.
eric.f241 is offline  
Old 10-22-2010, 06:48 PM
  #2  
50 Watt CAFz'r
 
wvince's Avatar
 
Join Date: Apr 2010
Posts: 98
Ignition key wire possibly split or broken to the harness or the GM Class2 chime retention interface?

Does hooking it up directly to the battery work? Of course it won't turn off with ignition but it should play toons.
wvince is offline  
Old 10-25-2010, 11:22 PM
  #3  
50 Watt CAFz'r
 
ToxicAcoustiks's Avatar
 
Join Date: Jun 2008
Posts: 157
run the red (acc) to a source that gets power when the ignition is on such as the ignition fuse at the fuse box
ToxicAcoustiks is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
judeodude
Install related
0
01-07-2014 01:40 PM
dubwoofer
Car Audio Technical Discussions
4
12-16-2012 12:09 PM
fcukit33
Car Audio Technical Discussions
0
07-26-2012 08:45 PM
seanbob91
Install related
4
02-15-2006 10:02 PM
dvdrat
Install related
40
04-21-2004 12:10 PM



Quick Reply: '03 Sunfire - Head unit problems



All times are GMT -5. The time now is 01:50 AM.