TNTSS

Hey guys!!!

I have found that after installing the HIDS into the car, I am getting
grounding noise like you would't beleive....

I changed the grounds to better chassis, and upped the guage....

IT helped a bit, but still there. What do you guys recommend? Maybe a filter
possibly an RF filter in series wiht the power?????

Thanks!

TNTSS

Anyone have any suggestions???? I am pretty p/o'ed about this....

Should I try a noise suppressor?

SQmonster

iTrader: (2)

Who installed the HID's? Did they ground the body of the ballasts to chassis ground?

TNTSS

I did the install, and I grounded both the body of the ballasts, and the
relays to chassis.

SQmonster

iTrader: (2)

Most HID's direct you to shield the ballasts from chassis ground. You might want to try segregating them from ground, then try it again.

TNTSS

How would you suggest I sheild the ballasts??
What is the best method?

Thanks BTW for the reply to this problem.

SQmonster

iTrader: (2)

Just make sure that the chassis of the ballast is not grounded or touching ground.

TNTSS

I will put a rubber piece underneath it and remount them.
I will keep you informed on the turn out.