Alpine type S parameters
#1
Alpine type S parameters
I recently bought an alpine type s SWS-1242D (dual 4 ohm) and after looking in the manual I found that many of the t/s parameters are "To be announced".
Basically alpine didn't ut down the T/s numbers and I can't find them anywhere. It wouldn't be so bad but they are missing Qms Qts Qes.
I have always used winisd to build my boxes that fit my situation, but with the lack of parameters It won't work. Does anyone have the T/s or know if older models t/s will be similar?
Does anyone have any suggestions about the box size? I'm going for SQ with this sub so I'm goin with a sealed setup. Thanks
Basically alpine didn't ut down the T/s numbers and I can't find them anywhere. It wouldn't be so bad but they are missing Qms Qts Qes.
I have always used winisd to build my boxes that fit my situation, but with the lack of parameters It won't work. Does anyone have the T/s or know if older models t/s will be similar?
Does anyone have any suggestions about the box size? I'm going for SQ with this sub so I'm goin with a sealed setup. Thanks
#5
Originally Posted by s14_240sx
The link didn't work. I'm not looking to buy the sub, I'm looking for missing T/S parameters that alpine for some reason didn't want to include in the manual.
Impedance 4 ohms
Cone Material Kevlar Reinforced Pulp
Surround Material 3/4" Santoprene Rubber
Sealed Box Volume (cubic feet) 0.85 - 1.5
Ported Box Volume (cubic feet) 1.25 - 2
Port diameter (inches) 4
Port length (inches) 12
Free-Air No
Dual Voice Coil Yes
Sensitivity 87dB
Frequency Response 26 - 1k Hz
RMS Power Range (Watts) 50-300
Peak Power Handling (Watts) 900
Top Mount Depth (inches) 6 1/4
Bottom Mount Depth (inches) 6 13/16
Cutout Diameter or Length (inches) 10 7/8
Vas (liters) 54
Fs (Hz) 31
Qts 0.66
Xmax (millimeters) 12.8
Parts Warranty 1 Year
Labor Warranty 1 Year
This is what crutchfield lists for that model sub
#6
Thanks for the help. This seams to be for the newer model type s, though it atleast gives som info on port length which is helpful. You'd think with Alpine being generally known for SQ they could atleast offer the complete T/S parameters instead of saying "Check our website for updates". How can you write that in an manual?
#7
Originally Posted by s14_240sx
Thanks for the help. This seams to be for the newer model type s, though it atleast gives som info on port length which is helpful. You'd think with Alpine being generally known for SQ they could atleast offer the complete T/S parameters instead of saying "Check our website for updates". How can you write that in an manual?
#8
UPDATE:
Alpine is worthless when it comes to customer service. I asked for the missing parameters and they basically told me to build a box of 1.25Cubes. They wound't give the the specs I need (QTS, QES, QMS) and basically brushed me off. how the **** can you build a sub and not include or have those specs?
Thanks for nothing alpine
Alpine is worthless when it comes to customer service. I asked for the missing parameters and they basically told me to build a box of 1.25Cubes. They wound't give the the specs I need (QTS, QES, QMS) and basically brushed me off. how the **** can you build a sub and not include or have those specs?
Thanks for nothing alpine
Thread
Thread Starter
Forum
Replies
Last Post