hi thank you very much for replying im going to use the advise.is it 1.5 cf per sub or for both of them.another question did you one 8" port vs two 6" port .thank you

 

The enclosure is 1.5 cubic feet for both subs, now this does not include displacements. For 2 10"s you should not need no more than (.25) for sub displacement. This would bring the box up to 1.75cbft., port displacemente is not an issue since you will be placing the ports externally. In my opinion due to the amount of wattage you will be using, if I am not mistaken you stated 2000watts. For that amount of wattage I would use no more than 1 6" aeroport, or even use 2 4" aeros. I work with 16 square inches of port per cubic foot of enclosure. Therefore on a 1.5cbft box you would need (1.5x16=24) 24 square inches of port. A 6" port has 28.25 square inches, and 2 4" ports have 25 square inches. So its up to you on which ports you decide on. Good luck and post some pics of the box and let us know the numbers......

 

thank you very much for all the help.im goin 2 start on the 10 of may when my friend get his tl.will keep you up to date on the bulid.thanks again

 

hi gays and girls.i had to go with a bigger box because i got low reading 141.6db .went with a 3cuft box with a internal port 8' and did a 148.1 db on a audio control.box not finish still have alot to do on it .used two 2000w amps strapped.150db here i came

 

Do you have any pics of the project...good to hear you are working on it.

 

will post same pic in the week , had problems with my internet since last week.

 

still no pics

 

hi.sorry for now only posting the pic.have made same changes on box like resining it inside and out.fiber glassed the back of the box still have not test again waiting on subs to return from repairs.last testing i did a 148.1db with two targa tg18 2000wrms and 2 probe batteries both are normal 1 .later goin to get 2 deep cycle batteries.will promise to keep yous updated

 

2sweet pm me your email address got something for you to try.

 

mr small db you got a PM