Need blueprints for a ported box for 2 10" Dcons
#1
Need blueprints for a ported box for 2 10" Dcons
I can build it myself, its just the design that im having trouble with. I'm going to be running 2 10" Dcon's at 250w. I want a ported box, and as per Thumpers recommendation, the box should be 2.0cf3 ( I imagine that's 2cf3 per sub.?) and tuned at about 33hz. The way I want to have it set up, is with 2 separate ports, one on each side of the box, going through the top. My plan is to remove the rear speakers on the parcel shelf, and run a port through each speaker hole. If someone could design something, It would be most appreciated.
The space I have to work with is:
15.5" high
3ft wide
Id like it to fill in the space as nicely as possible, so id like it if it would be 15.5" tall x 36" wide and however deep, to meet the cubic footage.
Thanks alot
The space I have to work with is:
15.5" high
3ft wide
Id like it to fill in the space as nicely as possible, so id like it if it would be 15.5" tall x 36" wide and however deep, to meet the cubic footage.
Thanks alot
#5
just a little heads up on Canadian SSA Customers
I will supply a Termpak printout for a simple enclosure build for all customers
that purchase SSA subs from Pound That Sound
I will supply a Termpak printout for a simple enclosure build for all customers
that purchase SSA subs from Pound That Sound
Last edited by thumpper; 01-31-2010 at 01:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post
kawana
Enclosure Design & Construction Help
2
02-24-2010 10:34 PM
cspurdy
Enclosure Design & Construction Help
13
01-29-2010 02:00 PM
cspurdy
Enclosure Design & Construction Help
2
12-18-2009 09:28 PM