I can build it myself, its just the design that im having trouble with. I'm going to be running 2 10" Dcon's at 250w. I want a ported box, and as per Thumpers recommendation, the box should be 2.0cf3 ( I imagine that's 2cf3 per sub.?) and tuned at about 33hz. The way I want to have it set up, is with 2 separate ports, one on each side of the box, going through the top. My plan is to remove the rear speakers on the parcel shelf, and run a port through each speaker hole. If someone could design something, It would be most appreciated.

The space I have to work with is:
15.5" high
3ft wide

Id like it to fill in the space as nicely as possible, so id like it if it would be 15.5" tall x 36" wide and however deep, to meet the cubic footage.

Thanks alot

 

give me a few minutes and I'll whip something up

 

sweet thanks! Hey, did the shipping company give any approx date when the subs will arrive?

 

e mail sent to you with the blueprints.........

if you have any questions contact me direct thru e mail

I'll have a tracking number as soon as the build house is done
assembling the subs

 

just a little heads up on Canadian SSA Customers

I will supply a Termpak printout for a simple enclosure build for all customers
that purchase SSA subs from Pound That Sound