Enclosure Design & Construction Help Post and discuss your car audio box construction, design, fiberglass and other fabrication questions here.

Ported or Sealed for my Focal Utopia Subs?

Thread Tools
 
Search this Thread
 
Old 04-19-2004, 05:23 PM
  #21  
 
chev2's Avatar
 
Join Date: Apr 2000
Posts: 1,220
Post

Originally posted by KillerGrand:
The JMLabs Grand Utopia Be speakers use Utopia woofers in ported enclosures.
http://www.focal-fr.com/fr/home/utopiabe/altobe.htm
How can you make a post like this?

1st) Requirements for a home sub/woofer is COMPLETELY different then a car.. A large open space like a room doesn't have the gain like the small closed enviroment of a car.

2nd) The home utopia woofers t/s are different then the car woofers. If you compare the 15" car and home drivers.. car/home fs = 35hz/24hz Vas = 122L/318L's QTS = .47/.35 There very different woofers, with different design theorys.

Focal recommends both a sealed and a ported design.. My personal opinion is that the ported design for the 27wx isnt very good at all, And with the power that greyz34 has, it will easily make up for the slightly less efficent sealed design..

[ April 19, 2004, 06:25 PM: Message edited by: chev2 ]
chev2 is offline  
Old 04-19-2004, 06:18 PM
  #22  
500 Watt CAFz'r
 
KillerGrand's Avatar
 
Join Date: Apr 2001
Posts: 774
Post

Originally posted by chev2:
</font><blockquote>quote:</font><hr />Originally posted by KillerGrand:
The JMLabs Grand Utopia Be speakers use Utopia woofers in ported enclosures.
http://www.focal-fr.com/fr/home/utopiabe/altobe.htm
How can you make a post like this?

1st) Requirements for a home sub/woofer is COMPLETELY different then a car.. A large open space like a room doesn't have the gain like the small closed enviroment of a car.

2nd) The home utopia woofers t/s are different then the car woofers. If you compare the 15" car and home drivers.. car/home fs = 35hz/24hz Vas = 122L/318L's QTS = .47/.35 There very different woofers, with different design theorys.

Focal recommends both a sealed and a ported design.. My personal opinion is that the ported design for the 27wx isnt very good at all, And with the power that greyz34 has, it will easily make up for the slightly less efficent sealed design..
</font>[/QUOTE]You are absolutely correct.
I was under the impression that the home/car drivers were more similar to one another than they actually are. I still vote for ported due to the driver's low QTS.
KillerGrand is offline  
Old 04-20-2004, 01:12 PM
  #24  
50 Watt CAFz'r
Thread Starter
 
Grey Z34's Avatar
 
Join Date: Dec 2000
Posts: 125
Post

yeah I'm still stuck on this cause vented will be louder and more transient but sealed will handle more power and play lower. Hmm...decisions, decsions.
Grey Z34 is offline  
Old 04-20-2004, 01:21 PM
  #25  
 
chev2's Avatar
 
Join Date: Apr 2000
Posts: 1,220
Post

actually sealed generally has better transient response.. Of course a properly designed ported box can have good transient response, just for the most part it wont be as good as the sealed.
chev2 is offline  
Old 04-20-2004, 06:58 PM
  #27  
50 Watt CAFz'r
Thread Starter
 
Grey Z34's Avatar
 
Join Date: Dec 2000
Posts: 125
Post

Really? I thought the sealed box handled more power becuase of the trapped air acting as a suspension.

Well according to instructions that came with the subs...the vented box seems like a regular joe-blow box. Just a port drilled in the top... See here


Since the picture for both sealed and vented are the same couldn't i just build the box sealed and if I don't like it just drill a couple of ports later for a vented box?


[ April 20, 2004, 08:44 PM: Message edited by: Grey Z34 ]
Grey Z34 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrchaos
General SQ
18
05-28-2004 07:55 PM
Hakujin
General SQ
14
05-10-2004 03:19 PM
Grey Z34
Enclosure Design & Construction Help
7
02-20-2004 02:51 PM
Grey Z34
General Discussion
3
11-20-2003 02:01 PM



Quick Reply: Ported or Sealed for my Focal Utopia Subs?



All times are GMT -5. The time now is 07:58 PM.