John__Taylor

iTrader: (3)

I have plans for a pair of subs that will sound very good in a 28Hz ported box. The box has been built more than once (not mine yet) and a few people have given in pretty killer reviews, so that is the one I have in mind.

Problem: I can only get ONE of those new subs quickly, the other has to be ordered in.

So, other than the mounting diameter which is smaller on my current subs, and can be opened up a bit later, I would like to go ahead with the box and mount my current subs in it.

Recommendation for current subs is VERY close on cubes, so no trouble there, and port volume is close. However the new subs want 28Hz, and my current subs want 30Hz according to Infinity.

How do you think it will sound if I throw my Infinities in there while I work on getting the other subs? More importantly, will I damage them by doing this?

I'm asking because one of my sons friends wants my Bassworx box and I said he could have it free (student), but i dont really want to go without bass for too long.

Current Sub specs: http://manuals.harman.com/INF/CAR/Bo...ers/122.7w.pdf

MR2NR

iTrader: (66)

Talk about splitting hairs, you will be fine.

John__Taylor

iTrader: (3)

Thank you Rob.

I really wasn't too concerned about hearing any difference (unlikely with me anyway), but more with fscking up the subs when some oddball bass note hit. I might "sell" him the subs for a case of beer or two later, but I wouldn't want them to be damaged, even if I gave them away.

Father Yuli

iTrader: (17)

28hz tuning? sounds way too low. is this pure sq or a very high powered application?

jalat

iTrader: (6)

I was going to say. 30hz is the lowest i'll go on a daily setup. i usually tune my enclosures around 35hz-36hz depending on the woofer being used and the power behind it.

John__Taylor

iTrader: (3)

They are a mixture, but the subs are known for going very low. I will need to beef up the midbass quite a bit in the doors (so I have been told), and power of 1200 to 1500 WRms is what the subs like, however 1800 to 2000 is pretty common according to the users.

Father Yuli

iTrader: (17)

i dunno man, thats tuning a box way too low. i'd tune around 35-37 like jalat mentioned.

John__Taylor

iTrader: (3)

Spec13Av.2 Subwoofer

Sealed Enclosure Yes

Vented Enclosure Yes

Infinite Baffle No



Spec13Av.2 Subwoofer

Sealed ( small )N/Aft³

Sealed ( ideal ) 1.3ft³

Sealed ( large ) 1.5ft³

Vented ( ideal ) 2.0ft³ Tuned to 30Hz

Vented ( DDLoud) 2.2ft³ Tuned to 35Hz






Qts: .45
Qes: .48
Qms: 7.48
Fs: 23.29Hz
Re: 2.81
Vas: 55.79L
Mms: 257.0g
Bl: 14.81T*m
SPL: 83.50dB
Sd: 556cm²
Xmax: 28.75 (Physical Linear)mm
Voice Coil: 76.0mm

Magnet Width: 7.500"
Cutout Diameter: 12.000"
Mounting Depth: 10.050"
Weight: 59lb
Total Height: 10.050"
Displacement: .12 ft³
Outside Diameter: 13.500"

I will try and go change the box design. I do believe you know more about this than I do. Thanks!!