You could make an integrated sub box and amp rack. Sub on left and amp on right. I made a nice box for a Tiburon like this and looks nice and clean. I love symmetry as well, but like you said, sometimes just doesnt happen.

 

update on this?

 

Looks better than the system I had in my pizza delivery car years ago.....

If you get a chance to test a theory.....try tossing a pizza in there and pound the snot out of it for 10 mins or so.....my guess is the cheese will have welded everthing in place so no damage.....

I could be wrong.....

 

I sent a PM to one of you but I just need to know how many cubes and what port area I would need for one of these subs?

 

Hey Zach,

Saw in one of your earlier posts that you said there was very little information... don't know if you already had this for the box calculations that you used?

Mfg. Suggested Enclosure sizes:

* Sealed: 0.5 - 1 ft^3 (per driver)
* Vented: 1.6 - 2 ft^3 @ 34 Hz (per driver)

T/S specs:

* FS = 21.37 hz
* Qts = 0.2638
* Qes = 0.2835
* Qms = 3.81
* Vas = 1.62 ft^3
* BL = 19 tm
* Re = 3.7
* Mms = 201.91 grams
* Le = 4.39
* Xmax (w/8mm coil in gap) = 0.7" one way
* Mounting Depth = 5.5"
* Cutout Diameter = 9 3/16"
* Basket Diameter = 10.5"

Hope this helps?

Cheers!

 

aww too bad those subs are dead now