General Discussion General discussion about all things car audio, from pioneer, orion, alpine and eclipse.

I wan't to change my setup, Subwoofers

Old Oct 5, 2008 | 01:22 PM
  #1  
Hydron's Avatar
Thread Starter
0 Watt CAFz'r
 
Joined: Oct 2007
Posts: 4
I wan't to change my setup, Subwoofers

Hi, I have a 12" Alpine type s in a vented Bassworks box( pretty big ) driven by a Pioneer GM-7100M (RMS Power at 2 Ohms = 360 W x 1 RMS Power at 4 Ohms = 250 W x 1). head unit : pinoeer DEH-P7700MP

I'm listening to Punk Rock, Death Metal, Metal, Hard-rock and a little bit of Dr. D.R.E amd Cypress Hill.
I find my bass not tight enough and not fast enought to hadle my music preferences.

Do you think that two 8" subwoofer in a sealed box will do the job?
Should I use two SVC 4" sub to get the 360w at 2 ohms of my amp
What brand and model of subs should I go for?

Sry for my english
Old Oct 5, 2008 | 02:11 PM
  #2  
1sweetLincoln's Avatar
50 Watt CAFz'r
iTrader: (1)
 
Joined: Aug 2008
Posts: 66
U should do 4 6x9's in a sealed box...
Old Oct 5, 2008 | 04:02 PM
  #3  
godzilla1978's Avatar
50 Watt CAFz'r
 
Joined: May 2007
Posts: 384
Originally Posted by Hydron
Hi, I have a 12" Alpine type s in a vented Bassworks box( pretty big ) driven by a Pioneer GM-7100M (RMS Power at 2 Ohms = 360 W x 1 RMS Power at 4 Ohms = 250 W x 1). head unit : pinoeer DEH-P7700MP

I'm listening to Punk Rock, Death Metal, Metal, Hard-rock and a little bit of Dr. D.R.E amd Cypress Hill.
I find my bass not tight enough and not fast enought to hadle my music preferences.

Do you think that two 8" subwoofer in a sealed box will do the job?
Should I use two SVC 4" sub to get the 360w at 2 ohms of my amp
What brand and model of subs should I go for?

Sry for my english
your type s is not getting enough power which is most likely why it is not tight enough. You are also goiong to want to scrap the bassworx box and get a properly tuned box for your sub. The twelve if powered properly will kill two 8's.
Old Oct 5, 2008 | 06:16 PM
  #4  
John__Taylor's Avatar
50 Watt CAFz'r
iTrader: (3)
 
Joined: Aug 2008
Posts: 483
Originally Posted by Hydron
Hi, I have a 12" Alpine type s in a vented Bassworks box( pretty big ) driven by a Pioneer GM-7100M (RMS Power at 2 Ohms = 360 W x 1 RMS Power at 4 Ohms = 250 W x 1). head unit : pinoeer DEH-P7700MP

I'm listening to Punk Rock, Death Metal, Metal, Hard-rock and a little bit of Dr. D.R.E amd Cypress Hill.
I find my bass not tight enough and not fast enought to hadle my music preferences.

Do you think that two 8" subwoofer in a sealed box will do the job?
Should I use two SVC 4" sub to get the 360w at 2 ohms of my amp
What brand and model of subs should I go for?

Sry for my english
I'm not a fan of the ported boxes myself, (probably just havent heard a good one yet) so I sealed mine and find the bass much less "rumbly". My Bassworx box had 2 slotted ports and was tuned to 38hz. I used heavy plastic as a liner and then used that expanding foam spray insulation to fill up the ports inside the box, and about halfway full from the top on the outside of the box.

I like the sound much better but you will be needing more power to overcome the resistance of the air on the back of the sub. Well, according to Infinitys documentation anyway.

Cheaper than buying a new box!

John
Old Oct 5, 2008 | 07:40 PM
  #5  
Hydron's Avatar
Thread Starter
0 Watt CAFz'r
 
Joined: Oct 2007
Posts: 4
here are my three options
1. I keep my type s and put it in a sealed box ( what size? )
2. I buy a CDTaudio EF-100 - 10'' - 250wrms - svc 4ohm in a sealed box and sell my type s and the ported box
3. I buy 2 CDTaudio EF-8CF - 8'' - 200wrms - svc 4ohm in a sealed box and use my 360rms at 2ohms from my amp and sell my type s and the ported box

What would you do????
Thanks
Old Oct 6, 2008 | 08:02 AM
  #6  
Hydron's Avatar
Thread Starter
0 Watt CAFz'r
 
Joined: Oct 2007
Posts: 4
up .
Old Oct 6, 2008 | 07:48 PM
  #7  
LOWTONEZ's Avatar
500 Watt CAFz'r
iTrader: (3)
 
Joined: Apr 2007
Posts: 872
How about, you just do the right thing. Properly ported box ( small size ) and not worry about it anymore.
Old Oct 6, 2008 | 09:29 PM
  #8  
sx4life's Avatar
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,832
Originally Posted by godzilla1978
your type s is not getting enough power which is most likely why it is not tight enough. You are also goiong to want to scrap the bassworx box and get a properly tuned box for your sub. The twelve if powered properly will kill two 8's.

I agree with this asfar as GET A GOOD BOX!

however the notion that 1 12" type S will rule over 2 8's I disagree I would put up 2 DD1508 subs to one them ANYDAY!

But dude build or have a proper box built for your sub. A box and properly powering your sub will make such a huge difference
Old Oct 6, 2008 | 09:53 PM
  #9  
CoreyC's Avatar
50 Watt CAFz'r
iTrader: (1)
 
Joined: Jun 2008
Posts: 230
Originally Posted by sx4life
I agree with this asfar as GET A GOOD BOX!

however the notion that 1 12" type S will rule over 2 8's I disagree I would put up 2 DD1508 subs to one them ANYDAY!

But dude build or have a proper box built for your sub. A box and properly powering your sub will make such a huge difference
1508s aren't cheap, you could buy a pair of type R 12s for the price you would pay for the 1508s.
Old Oct 7, 2008 | 12:33 AM
  #10  
sx4life's Avatar
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,832
LOL that depends on who u r!!!!

not to mention there was no specification to which 8's was just stating a fact.... but u are right depending on who u are u could get a pair of type r

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:35 AM.