Hardcore Rock Superstar

iTrader: (2)

OK i had buddy build me a box, cause it turns out i'm handicapped. It's been a solid box, but i've come to decide it's fairly peaky, if i move the xover a tiny bit one way or another i shouldn't notice a huge huge difference should i?

Well i totally do, and it doesn't seem to hit a lotta notes, sometime i'm gonna try and put together a test tone cd of various tones to see what exactly it does play and how much before it drops off.

What makes a box peaky like this?

[ June 02, 2004, 09:22 PM: Message edited by: Hardcore Rock Superstar ]

Chadxton

iTrader: (1)

If it's ported, try to lengthen the port.

Hardcore Rock Superstar

iTrader: (2)

ehh i shoulda grabbed all the specs from the dude, but he's got it on a pc that doesn't connect to the internet....

it's a pair of 12" alpine type r subs, seperate chamber, seperate ports

box is 38" wide...i'll have to to some measureing here in a moment - give me a few, gotta shower n then go get rent and i'll measure at that point how tall it is, and how deep it is at top n bottom

JRace

Also measure inside port length,
port diameter and let us know what thickness the wood is.

Hardcore Rock Superstar

iTrader: (2)

yes i'm an artist, no need to tell me how good the picture is



[ June 02, 2004, 02:41 PM: Message edited by: Hardcore Rock Superstar ]

Impala Builder

First thing your shop is an F'ing mess get your crap together and......lol just kidding

Try stuffing the ports/blocking them to esentially seal the box. If you find that the box now plays better it's probably incorrectly tuned (as in port length).

Not to familiar to Alpine gear but are they speced for use in a ported box ?

2 8's AKA Jeepbeats

iTrader: (19)

What is the top depth of the box?

Hardcore Rock Superstar

iTrader: (2)

woops, sorr top depth is 10"

width:38"
height:10"
top depth:10"
bottom depth:14"
back board:14.5"
thickness:0.75"
Ports 2x 8x3" rounds

2 8's AKA Jeepbeats

iTrader: (19)

Model number for the subs? SWR-1241D?