cca_newbie

that was the only size copper i had laying around but i got them trimmed down in size now about 1 inch instead of the 2 inch that it was.

i got the wires ran and half of the box done just waiting till pay day to get some more materials to finish that off then i can assemble everythig pics will be coming once i remember where i put my camera

cca_newbie

well i finally got some time today to work on the stereo a bit more today nice to have a day off where i can do it well this is my first attempt at a fiberglass box so let me know what you think so far.

BigRedGuy

iTrader: (11)

Looks good so far.....

A tie wrap every 6" or so on the loom will help keep it from opening up on you....

cca_newbie

well more work got accomplished today got the box all glassed next stage trim excess so it fits properlyand trim some down because the ring hits the window , most of the false floor was done as wel still needs more screws to hold the peices down the bottom board was warped so i flattened it down the best i could.

caron

looks good

cca_newbie

well i got a new job so it has been hard to get anytime to work on it but i managed to get a bit more done. finished the wiring got the box just about done needs some more sanding and carpet the floor is close where the holes are in the floor is going to be a peice of plexi flush with the top of the carpet. and started the other side just so the one with the sub wasnt so lonely.

cca_newbie

yay just about done. sort of. finished carpeting the back floor and box. put new carpet in for the floor as mine was moldy. but the drawer was to big so need to trim it down and re carpet

ndinadis

iTrader: (2)

looks good, what vehicle is this in? Looks like a smaller SUV?

cca_newbie

its an 86 s10 blazer