Quick Question/s...Plz Help
12-19-2009, 06:23 PM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Dec 2009
Posts: 3
Quick Question/s...Plz Help
Well i have a 12" cerwin vega Sub woofer (1200watt), can i run it on a MRP-M1000 Mono Alpine Amp? Also what wattage should i run it at with that amp. Also a mono amp can only run one sub woofer Yes/No? also any other amp that could be recommended that would work well with the sub woofer...which is not too expensive (around 200-300 buck region).... oh last question does it mater what kind of wiring kit i use or are there different ones...
12-19-2009, 06:33 PM
#2
How many ohms is your CV?
Yes the Alpine would be fine.
"Also what wattage should i run it at with that amp." I think you mean Ohms - run it at 2 ohms if you can.
Mono amps can run more than 1 sub.
Lastly, Depending on your future interests, I'd buy a 2 or 4ga amp kit that will work with your current plan and leave a little room for upgrading.
If your looking for BIG later, I'd buy 1/0ga wire instead of buying wire twice. 
Yes the Alpine would be fine.
"Also what wattage should i run it at with that amp." I think you mean Ohms - run it at 2 ohms if you can.
Mono amps can run more than 1 sub.
Lastly, Depending on your future interests, I'd buy a 2 or 4ga amp kit that will work with your current plan and leave a little room for upgrading.
If your looking for BIG later, I'd buy 1/0ga wire instead of buying wire twice.
Last edited by DeadlySones; 12-19-2009 at 06:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Troublesome '03
General Discussion
10
04-17-2017 11:59 PM
BrodieBiking
Enclosure Design & Construction Help
1
05-05-2014 01:11 AM
shadetreeaudio
Enclosure Design & Construction Help
2
08-12-2013 11:17 PM
CdnCory
Canadian General Car Audio Discussion
14
06-04-2005 07:02 PM
