Ring Terminals.... where do you guys get them?

Reply Subscribe

Thread Tools

Search this Thread

Mar 12, 2008 | 12:15 PM

#21

Father Yuli

Level 3 Supporter

iTrader: (17)

Joined: Oct 2000

Posts: 11,604

Quote:

Originally Posted by liv2ride

drill right through, I think he means that he drills from inside the 4 0/ga hole right through the other end, so that the wire isn't fed into the hole as the connector whole is tapered at the end, I did that with my 4 gauge, so I could get a better grip on the wire.

but I could be wrong

exactly what he said.

Mar 12, 2008 | 02:39 PM

#22

JordyO

Thread Starter

4000 Watt CAFz'r

iTrader: (17)

Joined: Sep 2002

Posts: 6,363

Gotcha.... i'll give it a try!

Mar 13, 2008 | 09:31 PM

#23

Greg_Canada

50 Watt CAFz'r

iTrader: (2)

Joined: Feb 2007

Posts: 63

On the topic of crimping big terminals (4 gauge or bigger)
Is it even possible to use anything other than a vice? I've always had to use a vice for them, no way my box end's were closing those connectors....
You guys got any tips?

Oh, and after many botched crimps, i figured you you have to do one half first, then get the next one to fold over it, then tighten like heck... it's worked perfectly since....

Mar 14, 2008 | 12:05 AM

#24

Father Yuli

Level 3 Supporter

iTrader: (17)

Joined: Oct 2000

Posts: 11,604

you can always use a nice hammer

Mar 14, 2008 | 01:37 AM

#25

sx4life

1000 Watt CAFz'r

iTrader: (1)

Joined: Mar 2007

Posts: 1,832

u can always buy the proper crimps

Mar 14, 2008 | 05:12 AM

#26

The Wizard

50 Watt CAFz'r

iTrader: (2)

Joined: Nov 2007

Posts: 285

I use a crimp adapter that I made and use a big honking pair of vise grips to do the squishing. Works good and they go on super tight, the only drawback is that your hands get sore after a few crimps.