OK will i measure 12inchs on the tube or on the outer flare to the other one, Cant i use like a type of PVC glue or something... screwing them in want hurt em?!

 

u can use just regular pvc but it wont be the same, aero ports are much louder.

by centering the ports i ment u have them at very bottom of the box but in the middle.

when u get the ports it will tell u what size hole to cut and everything. every port kit comes with its own instructions

i think u can break into 140's on the pressure sensor.

[ December 31, 2004, 01:50 AM: Message edited by: Father Yuli ]

 

I think u should buy your ports and build your box and drive to your local shop or show and run it through the meter and see what happens : nothing is perfect the first time but u never know , go ahead and try it out

 

Thanks guys, I cant wait to get it all set up.... Can yall think of any other thing i may need to know, will i only need one or 2 sheeps of 3/4 "MDF"? i think that's what it's called... thanks guys....

 

if the person who's cutting the wood for u knows what he's doin u should only need 1 sheet of 4x8 to make box with those dimentions

thats all u should know as far the box goes

 

if you can use 1 inch it will make the enclosure a lot more solid, and reduce flexing and reduce resonances

 

USE BASSBOX, IT WILL SAVE YOU 'SO MUCH TIME AND MONEY' honestly, stop wasting your time, and use a program that factors in everything. and by the way. Use the wood called "Baltic Birch" it is as rigid as 1"MDF and wieghts half as much

 

alghough u could use a box program none of them would suggest for u to make a box like this



yes it looks retarded infact but ohhh how loud it was in my grand cherokee, 2nd place iasca finals with that very box

 

ahahahaha oh yuli.. we make spl look like ART!!


Livin Loud

 

indeed Curtis

where is our Nobel peice

[ December 31, 2004, 07:25 PM: Message edited by: Father Yuli ]