10 inch sub

Features
Size 10"
Woofer Cone Material Interlaced Carbon Fiber/Glass Fiber Reinforced
Surround Wide-Roll 3-Layer Fiber Woven Radial with Honeycomb Cloth
Voice Coil Dual 4-Layer, Long Voice Coil (2 x 4ohms)
Voice Coil Bobbin 4-Slit Glass-Imide
Conex Damper with Damper Ring
Top Plate Thick 7/8" (20mm)
Projected Pole Yoke with Vented Pole
Magnet Construction Double Stacked (80oz)
Basket Design Aluminum Die-Cast Rigid Chassis
Gasket 1-Piece Rubber
Wire Terminals Silver Binding Posts
Specifications
Watts MAX. Music Power 1500W
Watts Nominal Power Handling 600W
Frequency Response 18Hz ~ 2,500Hz
Sensitivity 87dB
Ohm Rating DVC (2ohm or 8ohm)
Recommended Enclosure 1.0 Cubic Feet


Should I be using an amp that does 2ohm or a mono or what? I have no idea
Not too sure if am leaving any info out
Any help would be appreciated

 

I only have 1
Not too sure why I only went with one

 

if you want spl go with the ported box specs that come with the sub. they work pretty good. do you have a budget for an amp?pioneer gmd510m for around 400 will run it at 2 ohms,or go with a jbl gto601.1 for about 500.

 

well my budget is around 300 so I think I'm going to have to get a used one

but you've given me some ideas on amps to look for, thanks