Street C
#1
Street C
Hi guys
i have decided to build my mini morris for street c class.
the car plays around 67-68 frequency.
could someone help me with box designs... what cuft should i be looking at?
i know this is a very arb question - but does anyone have any pics of the inside of the panda?
i have decided to build my mini morris for street c class.
the car plays around 67-68 frequency.
could someone help me with box designs... what cuft should i be looking at?
i know this is a very arb question - but does anyone have any pics of the inside of the panda?
#4
Hmmmm, unfortunately I can't find any specs other than 4000watts peak and I don't know anything about what kind for environment these subs like... so I can't help a whole lot on no info.
This is all I could find.Still no T/S specs or enclosure recommendations.
This is all I could find.Still no T/S specs or enclosure recommendations.
Last edited by DeadlySones; 03-15-2010 at 07:17 AM.
#5
Competition
Hope this helps...
SSWD-8215
Basket 15” Alum. w/black anding finish
VC 3” VC – Titanium bobbin
Impedance Dual 2 ohm
Magnet 220x110x25 Y25 3 pc. 369.5 Oz.
Cone Black glass fibre w/highnarrow foam surround
T-yoke + upper plate 15mm chrome plated T-yoke; 16mm chrome plated upper plate
Spider Black Conex 2 pcs.
Gasket Rubber
Hope this helps...
SSWD-8215
Basket 15” Alum. w/black anding finish
VC 3” VC – Titanium bobbin
Impedance Dual 2 ohm
Magnet 220x110x25 Y25 3 pc. 369.5 Oz.
Cone Black glass fibre w/highnarrow foam surround
T-yoke + upper plate 15mm chrome plated T-yoke; 16mm chrome plated upper plate
Spider Black Conex 2 pcs.
Gasket Rubber
Thread
Thread Starter
Forum
Replies
Last Post
Thrill_House
General Discussion
3
05-20-2005 09:09 PM