Best SQL sub
Css Sdx10
ightweight paper and carbon fibre blend pressed and surface treated cone
· CONEX 180mm flat attach semi-progressive spider
· NBR 30mm roll surround
· Low distortion patented XBL2TM motor topology with split aluminium former, aluminium and copper shorting rings
· 6 layer 4 ohm 2.39” (60.6mm) voice coil with copper clad aluminium wire
· Flat BL curve with less than 2.5% THD at 1” (25.4mm) peak to peak excursion
Fs 26 Hz, Qes 0.47, Qms 4, Qts 0.42, Vas 53 l, Re 3.5 ohms, Xmax 18.4mm, Sd 300 sq cm, Le 1.42 mH, BL 11.8 Tm, Mms 112 g, Pe 300 watts
$ 100 can
· CONEX 180mm flat attach semi-progressive spider
· NBR 30mm roll surround
· Low distortion patented XBL2TM motor topology with split aluminium former, aluminium and copper shorting rings
· 6 layer 4 ohm 2.39” (60.6mm) voice coil with copper clad aluminium wire
· Flat BL curve with less than 2.5% THD at 1” (25.4mm) peak to peak excursion
Fs 26 Hz, Qes 0.47, Qms 4, Qts 0.42, Vas 53 l, Re 3.5 ohms, Xmax 18.4mm, Sd 300 sq cm, Le 1.42 mH, BL 11.8 Tm, Mms 112 g, Pe 300 watts
$ 100 can
Css Sdx10
CSS SDX10
Lightweight paper and carbon fibre blend pressed and surface treated cone
· CONEX 180mm flat attach semi-progressive spider
· NBR 30mm roll surround
· Low distortion patented XBL2TM motor topology with split aluminium former, aluminium and copper shorting rings
· 6 layer 4 ohm 2.39” (60.6mm) voice coil with copper clad aluminium wire
· Flat BL curve with less than 2.5% THD at 1” (25.4mm) peak to peak excursion
Target Parameters
Fs 26 Hz, Qes 0.47, Qms 4, Qts 0.42, Vas 53 l, Re 3.5 ohms, Xmax 18.4mm, Sd 300 sq cm, Le 1.42 mH, BL 11.8 Tm, Mms 112 g, Pe 300 watts
Lightweight paper and carbon fibre blend pressed and surface treated cone
· CONEX 180mm flat attach semi-progressive spider
· NBR 30mm roll surround
· Low distortion patented XBL2TM motor topology with split aluminium former, aluminium and copper shorting rings
· 6 layer 4 ohm 2.39” (60.6mm) voice coil with copper clad aluminium wire
· Flat BL curve with less than 2.5% THD at 1” (25.4mm) peak to peak excursion
Target Parameters
Fs 26 Hz, Qes 0.47, Qms 4, Qts 0.42, Vas 53 l, Re 3.5 ohms, Xmax 18.4mm, Sd 300 sq cm, Le 1.42 mH, BL 11.8 Tm, Mms 112 g, Pe 300 watts
i dunno w7 worked well for me on a 600w amp, could get it to move. it depends though what's your reference of efficient
.
after all isn't it a matter of integrating with the rest. its pricey though.
the sdx10s look darn good for a hundred. if i was in the market for 10s i'd get a couple to play around. funny how xbl2 is so affordable now with a couple of woofers around for not much. wonder how well they are implemented. judging from shiva/tempest-x it's not bad
.
.after all isn't it a matter of integrating with the rest. its pricey though.
the sdx10s look darn good for a hundred. if i was in the market for 10s i'd get a couple to play around. funny how xbl2 is so affordable now with a couple of woofers around for not much. wonder how well they are implemented. judging from shiva/tempest-x it's not bad
.
I am actually going to grab a couple. Curiosity took over, and cannot lose for 100 bux a pop, cause I got 1.2 cubes sealed 2x10" box.


