katphysh

Any tips would be awesome!!

Here's my setup...

Upfront..

IVA-W200
Focal Polyglass 165 V2 (component set)
10" Kicker CompVT

In the back

4 x 12" Kicker Solo-Baric L5
ZX700.5 (80watts to each tw, and mid, 430 watts to 10" sub)
ZX2500.1 (2500watts to four 12")
2 x YellowTop optima batt. (w/ seperate 140watt alternator for system)
PXA-H701

Just looking for a place to start the tuning process...any tips for Time correction to achieve good imaging and width and eq'ing is where I'm at right now.

Thanks for your help in advance

dogstar

iTrader: (2)

Are you running your components active or passive?
With a h701 I would try running them active, but it is a big learning curve if you are just getting into it.

Time correction formulas/sheets are floating around on diyma and icix, but damned if I can find them right now.

I think the manual covers time correction as well, but basically, you measure the distances of all the speakers from your head, then divide by speed and that will give you how many milliseconds to delay.