Suggestion of amps for MXS1204?
#1
Suggestion of amps for MXS1204?
Hey, i got 2 MTX 12" MXS1204 subwoofers and was looking for suggestions of amps. I want the amp to be around 400watts RMS; mono or 2 channel. I'm also looking for an amp with awesome sound quality. Also needs a built in LP crossover or just an xover for subs.
I currently am running a very old thunder acoustic 400watt amp, and it is making my subs sound bad. I just tried my dad's JL 300/4 amp and it sounded a LOT better with my subs.
My budget is $400CAD or less. If possible, under $350.
Thx in advanced
I currently am running a very old thunder acoustic 400watt amp, and it is making my subs sound bad. I just tried my dad's JL 300/4 amp and it sounded a LOT better with my subs.
My budget is $400CAD or less. If possible, under $350.
Thx in advanced
#2
If you wanted to stay with MTX you can try a TC6001. I'm assuming you'll be running @ 2ohm. The 6001 will do 600 watts RMS. I know thats a bit more then you wanted but it will sound great on those woofers. I knew a guy that was using a TC8001 on 2 12" MXS in a Daytona and did a 140.7 on a TL. Yes there are better more expensive amps out there, but this one will be quite addiquite for the job.. and easy on the wallet.
I believe the TC6001 lists for $549 but im sure you can find it cheaper.
OR
You can get the TC4001 that will do 400 watts RMS @ 2ohm for $349.99 brand new.. again im sure you can find it cheaper.
The 6001 will still sound way better..
I believe the TC6001 lists for $549 but im sure you can find it cheaper.
OR
You can get the TC4001 that will do 400 watts RMS @ 2ohm for $349.99 brand new.. again im sure you can find it cheaper.
The 6001 will still sound way better..
Last edited by CanadianBassGuy; 04-13-2007 at 02:49 AM.
#3
lol, i dun really care about loud as long as it can reach 100db or so. I just want QUALITY thumping. My old amp makes a funny gurggling/distortion when the gain is turned past half. (It ain't my subs, cause i tested them with a JL AUdio 300/4 and it sounded great at loud volumes)
btw, i don't care what company, i dont have a bias. Just need a good amp thats all. Doesn't have to be MTX. and also, my subs are 4ohms (forgot to mention).
Also, what do u mean by TC6001 will sound way better...? Do u mean louder or better SQ?
but thanks for suggestion so far.
-sorry for bad english
btw, i don't care what company, i dont have a bias. Just need a good amp thats all. Doesn't have to be MTX. and also, my subs are 4ohms (forgot to mention).
Also, what do u mean by TC6001 will sound way better...? Do u mean louder or better SQ?
but thanks for suggestion so far.
-sorry for bad english
Last edited by ian209; 04-13-2007 at 03:04 AM.
#5
wait... found the TC6001 for $198
http://www.hookedontronics.com/show_product_details.jsp?cid=26043
Are u sure this isn't too much power for my subs? I don't wanna kill it.
EDIT: NVM my last sentence, the 6001 only does 300watts RMS.
http://www.hookedontronics.com/show_product_details.jsp?cid=26043
Are u sure this isn't too much power for my subs? I don't wanna kill it.
EDIT: NVM my last sentence, the 6001 only does 300watts RMS.
Last edited by ian209; 04-13-2007 at 03:10 AM.
#6
Not exactly. You have 2 single coil 4ohm subs.. which means if you wire them parallel you can achieve a 2 ohm load which then 6001 will put out 600watts RMS. Like I said before my buddy has a TC8001 on 1 MXS's and it runs just fine.
Also that is a fantastic price
Also that is a fantastic price
Thread
Thread Starter
Forum
Replies
Last Post
Buffdaddy
Car Audio Forumz feedback and suggestions
24
12-01-2004 10:53 PM