CD stuck in deck but still works :(
#1
CD stuck in deck but still works :(
So I installed my deck all was fine and everything was working, the next day I noticed the deck was out a bit too much and wanted to fix it so it looked a little more "smooth" I took it out adjusted a few things and put it back in. Now out of the blue I cannot remove the cd. When the eject button is pushed it makes the noise as if it were trying to remove the CD but nothing happens. The wierd thing here is the cd still plays and everything else to do with the deck works also. So I took the top panel off to see if I could see a problem or something that looked odd but I saw nothing out of the ordinary. The deck is a Premier DEH-P930 so only a couple years old. Im not so intrested in getting the cd as I am to getting the deck working again if possible.
Any help would be appreciated or links too some type or solution.
Any help would be appreciated or links too some type or solution.
#2
there is a reset button, it will clear everything.
i had a problem with a cold solder joint inside my p-99, that button worked like a charm.
it should be accessable with the detachable face removed(small hole)
i had a problem with a cold solder joint inside my p-99, that button worked like a charm.
it should be accessable with the detachable face removed(small hole)
Thread
Thread Starter
Forum
Replies
Last Post
paulo500
Car Audio Technical Discussions
4
01-18-2010 10:29 AM
hott-nix
Install related
4
11-16-2007 11:53 AM
catalyst007
Install related
0
08-06-2007 08:19 PM