DVC SUB Wiring HELP

Reply Subscribe

Thread Tools

Search this Thread

02-26-2004, 08:58 AM

gd_85

0 Watt CAFz'r

Thread Starter

Join Date: Feb 2004

Posts: 20

Hey, i have a rockford HE2 and i was wondering what is the best way to wire the sub..2ohms or 4ohms? How do i go about doing this. Thx

02-26-2004, 09:01 AM

Buffdaddy

1000 Watt CAFz'r

Join Date: Nov 2000

Posts: 1,078

www.jlaudio.com

go to the tutorials section, they have an excellent DVC FAQ and wiring diagrams

Wire for the impedance that best matches your amp's power output

02-26-2004, 09:13 AM

gd_85

0 Watt CAFz'r

Thread Starter

Join Date: Feb 2004

Posts: 20

If i wire the sub up for 8ohms can i run it at home to test it on my house stereo?

02-26-2004, 09:44 AM

JohnnyToronto

1000 Watt CAFz'r

iTrader: (2)

Join Date: Apr 2003

Posts: 1,856

Umm if it's a dvc 4 ohm, you can wire it to 2 ohms, or 8 ohms, and yes you'd be able to test it on your house stereo.
I don't see how you can wire it at 2 or 4 ohms, it's either 2 or 8 (if you have a dvc 4 ohm).

02-26-2004, 09:50 AM

gd_85

0 Watt CAFz'r

Thread Starter

Join Date: Feb 2004

Posts: 20

yea sorry...So if i write it to 2ohm is ok to test at home? nothing will be damaged? or must it be at 8 to test at home?

02-26-2004, 10:49 AM

imntense

50 Watt CAFz'r

Join Date: Dec 2003

Posts: 268

8 ohm is the norm for home equipment, do not wire for two or you will have problems! Good luck!

02-26-2004, 05:20 PM

lemonlime

500 Watt CAFz'r

Join Date: Jul 2003

Posts: 756

If you have a fairly good quality home audio amplifier/receiver, you can usually run a 4ohm driver without incident, however a 2ohm load is certainly pushing the limits.