Elash47

Please Bare Through This
Hi there I just finished installing the VM9312 in my Honda Fit. Heres the problem everything works fine for the first 5 minutes of every drive, then my screen goes blue but you can still hear the sound, This is while just listening to the radio, I know you cant see a DVD while moving but you should be able to see the screen when listening to radio or Music CD correct?. then when I stop moving, the picture shows, then when I start moving boom blue it goes again. I can even just push my own car while its running and the screen will go blue. Then when I switch Source ( aux 1 aux 2 camera ) and such the screen will flicker and show the picture for a split second then go back blue. It almost seems like theres a motion sensor not letting the screen show whats on it? I cannot just turn my car off and on right away either it has to be off for at least a half hour to work the first 5 minutes. also this blue screen I'm talking about does NOT say "It is illegal to watch video while driving". It is simply just plain blue, when i increase volume it will show the little yellow numbers on my screen or when i change contrast / color it will show the little ratio bars. When I installed it there was a Yellow wire off deck I hooked to car constant power and a orangey red wire that i hooked to ignition power. I hooked up every wire from the deck to the wiring harness adapter I got for the car. These are the only wires that I believe I could have messed up on. I did however hook up the E-brake wire up to a toggle then to a car ground. Not sure if the car ground I picked was great although the fact the the deck turns off when movement is detected and on when it stops shows that the grounds good? (maybe not?)

Has anyone heard of this? any and all help appreciated THX!
If any more info is needed please ask!

Elash47