relay necessary?
I think you would feel different if you heard a car with excellent imaging in the front stage.
If you still feel having rear fill is worthwhile, get a decent pair of rear speakers and use a crossover to take the bass out of them or they will distort.
If you still feel having rear fill is worthwhile, get a decent pair of rear speakers and use a crossover to take the bass out of them or they will distort.
Originally posted by Hardwrkr:
I think you would feel different if you heard a car with excellent imaging in the front stage.
If you still feel having rear fill is worthwhile, get a decent pair of rear speakers and use a crossover to take the bass out of them or they will distort.
I think you would feel different if you heard a car with excellent imaging in the front stage.
If you still feel having rear fill is worthwhile, get a decent pair of rear speakers and use a crossover to take the bass out of them or they will distort.
I have replaced the front speakers and they sound louder and clearer then the factory ones.
Doesn't getting decent rear speakers then just cutting out the bass defeat the purpose of getting them in the first place?
Originally posted by bigmike216:
if you're powering 2 amps, then you will need 5 wires to the relay [img]smile.gif[/img] Power (Terminal 87), Ground (terminal 86), Trigger(remote from HU, Terminal 85), and one for the remote turn for each of the amps. both of those 2 would be connected to the same point, terminal 30.
if you're powering 2 amps, then you will need 5 wires to the relay [img]smile.gif[/img] Power (Terminal 87), Ground (terminal 86), Trigger(remote from HU, Terminal 85), and one for the remote turn for each of the amps. both of those 2 would be connected to the same point, terminal 30.
1000 Watt CAFz'r
Joined: Oct 2003
Posts: 1,649
what do you mean? you've got the remote turn on wire conencted directly to the amps right now.. so just remove it from there and attatch it to terminal 85. the other 3 should be easy, as they'll probebly be wires you'll have to run.
Look I'm easily confused. Such as there was a 87a but looking at it closer that one doesn't get used.
The way I see it is this:
85 remote wire black (tape to original remote wire)
86 ground white (insert into ground on big amp)
87 power yellow (insert into power on big amp)
30 new remote blue (insert into REM on big amp and run another wire from there to second amps REM spot)
[ March 14, 2004, 07:20 PM: Message edited by: wiltshire559 ]
The way I see it is this:
85 remote wire black (tape to original remote wire)
86 ground white (insert into ground on big amp)
87 power yellow (insert into power on big amp)
30 new remote blue (insert into REM on big amp and run another wire from there to second amps REM spot)
[ March 14, 2004, 07:20 PM: Message edited by: wiltshire559 ]
Thread
Thread Starter
Forum
Replies
Last Post
