Ok I have 2 12" Rockford P2 Punch subs and a Rockford P325 amp. The subs are SVC 4OHM and the amp is rated at 200 RMS @4 OHMS and 400 RMS @2 OHMS. How would I wire this up properly? Series or parallel and what type of wire to use between the subs and the amp? And where would I get power for the remote for the amp?

Thanks so much

 

Wire the woofers in parallel. 14ga wire should be fine.

The 'remote' comes from the blue/white wire on an aftermarket CD player. If you are running a stock deck, then tag the power antenna wire. If you don't have power antenna then wire it to an accessory circuit that is only powered up with the key on.

 

wire the subs in parellel to have a 2 ohm load to the amp..

14 gauge wire will work just fine