Bodywork Help??

Reply Subscribe

Thread Tools

Search this Thread

03-30-2004, 11:23 PM

#11

slow/n\low

500 Watt CAFz'r

$slow/n\low's Avatar$

Join Date: Aug 2001

Posts: 866

What is rust?? is it the thing that we dont get on our cars in BC for a really long time [img]tongue.gif[/img]

$slow/n\low is offline$

03-30-2004, 11:27 PM

#12

Thumper89

2000 Watt CAFz'r

Thread Starter

Join Date: May 2003

Posts: 2,819

Quote:

Originally posted by slow/n\low:
What is rust?? is it the thing that we dont get on our cars in BC for a really long time [img]tongue.gif[/img]

Actually...this is an old BC car..Port Coquitlim(sp?)..so there..

03-31-2004, 07:16 PM

#13

Logan Lundy

Guest

Posts: n/a

Just take a grinder and take off the paint about 2"-3" from where the rust is, then grind off the rust, or media blast it all off. once the rust is all off then you should use a metal conditioner to neutralize the metal. all your filler.....you should NEVER apply filler more than 1/8" thick or you can easily run into problems. sand it smooth prime it and paints it easy as that.

03-31-2004, 07:17 PM

#14

Bigmike216

1000 Watt CAFz'r

Join Date: Oct 2003

Posts: 1,649

maybe back-2-bassiks will chime in now that he's back [img]smile.gif[/img]

03-31-2004, 07:28 PM

#15

Logan Lundy

Guest

Posts: n/a

*chime*

03-31-2004, 08:13 PM

#16

Tha-Game

500 Watt CAFz'r

Join Date: Aug 2000

Posts: 924

holy... sounds like all that "higher learning" is workin..... where were u when i needed answers to copy in highschool.... jerk....

look at this guy.... hes back for not even an hour and hes all "look at me im better then EVERYONE..... pfffft..... ill bash u good at RAW ......

03-31-2004, 09:50 PM

#17

Bigmike216

1000 Watt CAFz'r

Join Date: Oct 2003

Posts: 1,649

hahah, helpful answer there back-2-bassiks [img]tongue.gif[/img] [img]graemlins/thumb.gif[/img] didnt see your reply above mine there [img]tongue.gif[/img]

[ April 01, 2004, 12:41 AM: Message edited by: bigmike216 ]

03-31-2004, 10:39 PM

#18

Thumper89

2000 Watt CAFz'r

Thread Starter

Join Date: May 2003

Posts: 2,819

Quote:

Originally posted by Back-2-Bassiks:
Just take a grinder and take off the paint about 2"-3" from where the rust is, then grind off the rust, or media blast it all off. once the rust is all off then you should use a metal conditioner to neutralize the metal. all your filler.....you should NEVER apply filler more than 1/8" thick or you can easily run into problems. sand it smooth prime it and paints it easy as that.

You got some spare time some weekend?I'll supply the beer,supplies,most of the labour and whatever tools I can round up...PM me if you game..