May 5th, Db Drag Edmonton (edited)
Originally Posted by sundownz
Brad is running a more conventional load on the amps.
At 2 ohms strapped Loyd's clamp meters showed 3150 watts @ 12.8 volts -- which is almost exactly what you would expect from two 1500 watt amplifiers rated accuratly at 12.8 volts.
Loyd did measure 4425 from the pair strapped at 1/2 ohm with 12.8 volts, aka: 1/4 ohm per amplifier. I don't suggest that... we are only able to get that stable for burps in my brother's truck as that is the load we run for SPL burps. It also tends to blow the amp internal fuses after a few runs when they heat up.
At 2 ohms strapped Loyd's clamp meters showed 3150 watts @ 12.8 volts -- which is almost exactly what you would expect from two 1500 watt amplifiers rated accuratly at 12.8 volts.
Loyd did measure 4425 from the pair strapped at 1/2 ohm with 12.8 volts, aka: 1/4 ohm per amplifier. I don't suggest that... we are only able to get that stable for burps in my brother's truck as that is the load we run for SPL burps. It also tends to blow the amp internal fuses after a few runs when they heat up.
Wasn't even close to where I wanted to be. Next time Ill come with a little better setup.
Originally Posted by SPLn00b
I was expecting you guys to say something more along the lines of "**** you guys im never coming to a show again"
I know I will NOT buy DD now...And I had emailed for quotes on some too...
Originally Posted by SPLn00b
nice, SUNNNNNNNNNNNNNNNNNNNNNNNNNNNNNDOOOOOOOOOOWNNNNNNN NNNNNNZZZZZZZZZ
anyways, you SHOULD indeed try DD.
every class that had someone using DD in it, won.
anyways, you SHOULD indeed try DD.
every class that had someone using DD in it, won.
Last edited by silverbane; May 7, 2007 at 12:31 AM.
