penticton finals/amp issue
take Dons solution as temporary ( it works), and get the deck fixedif you blew something up such as a sub or and amp or any other speaker you may have blown a ground trace on the board... it fairly an easy fix if you know electronics and can solder surface mount using a very very fine tip
Thanks for all your input guys, I did some playing today and heres the final verdict:
I swapped out decks put my old kenwood back in, and poof everything good again. My new excelon is skrewed now I guess
so I guess get my new deck fixed and use my old one till it done
the ground out rca thing I asked don how to do, as I never done it before LOL.
any suggestions on a company that is reasonably priced and somewhat close to sask to get deck fixed?
I swapped out decks put my old kenwood back in, and poof everything good again. My new excelon is skrewed now I guess
so I guess get my new deck fixed and use my old one till it donethe ground out rca thing I asked don how to do, as I never done it before LOL.
any suggestions on a company that is reasonably priced and somewhat close to sask to get deck fixed?
50 Watt CAFz'r
Joined: Aug 2008
Posts: 241
So was doing some testing today, which didnt last long, and the I went to hook the possitive speaker wire from my sub to my amp outputs and the wire slipped out of my hand and arced from the terminal to the body of the amp which put the amp into protect.
amp - Bassworx BA3000.1d
So I turned everything off finished wiring a few things and turned it all back on hopin it wasnt messed, but when its back on it is just pumping out mass feedback now, which goes away when I unhook the rca's to the mono block, but at the sametime NOW my front speakers are making alt whine which I assume is either my 4 channel is now messed aswell or my deck from that wire shorting on the body of the amp?
So does anyone have a quick fix for something like this?
if not
Is someone gonna be at the penticton finals that can lend me an amp for street A? I will turn my gear off to install it
Thanks for your time
Kevin
amp - Bassworx BA3000.1d
So I turned everything off finished wiring a few things and turned it all back on hopin it wasnt messed, but when its back on it is just pumping out mass feedback now, which goes away when I unhook the rca's to the mono block, but at the sametime NOW my front speakers are making alt whine which I assume is either my 4 channel is now messed aswell or my deck from that wire shorting on the body of the amp?
So does anyone have a quick fix for something like this?
if not
Is someone gonna be at the penticton finals that can lend me an amp for street A? I will turn my gear off to install it
Thanks for your time
Kevin
U know better than to be pissin around with chit before you have pulled ur????? What again........... Oh Yeah ur EFFIN fuse.... What were u thinking. Dumb ***... But I am glad u got it figured out.... Now till after the 22nd BE CAREFUL. lol
