prabhakarglv

Hi,

Good Morning. How to access H1/3 Brown Horn wire of Viper (+Ve) to Engine compartment in Honda Element. I tried my level best to feed the wire, but I didn't find the exact location to feed?

H2/8 Brown/Black (-)200mA Horn Honk Output -> Orange (-ve) @ Steering Column OR NEED NOT TO USE, am I right? I mean if I feed the Viper H1/3 (Brown +ve) Horn wire to VIPER HORN , I don"t need to use this H2/8 wire, right?

OR

Instead of all this mess shall I directly connect the H1/3 Brown Horn wire of Viper (+Ve) TO Orange (-ve) @ Steering Column. If so, shall I still connect the H2/8 Brown/Black (-Ve 200mA) Horn Honk Output along with H1/3 Brown Horn wire of Viper TO Orange (-ve) @ Steering Column???? The only problem is, I'm not sure my vehicle is already equipped with factory security system or not??? How can I test it whether it's have or not? I'm already connected many wires from RS Brain, so is that safe do the test like whether my vehicle is already equipped with factory security system or not at this point???

H1/5 White Parking light output -> (+) Red/Yellow @ Fuse Box Top Green connector (set the fuse to + in the alarm's brain). What is this mean and how to do that? I already connected the wire, but confused about set the fuse to + in the alarm's brain.

I already connected the OMEGA BYPASS MODULE TRUNK RELEASE OUTPUT WIRE (-Ve) to H2/5 Red/White (-)200mA Trunk Release Output. So i don't need to connect this H2/5 wire Car's Trunk Release (-Ve) Black/Yellow wire in Driver Kick Panel, is that right?

I connected the GWR Wire of Bypass Module (Omega OL-AL) to H2/9 Dark Blue (-)200mA Status Output. Need I've to extend this H2/9 wire to any wire in my car, I don't need to, is that right?

Please find me your answer.

Thank you.

IT Hz

iTrader: (1)

I respect that your giving effort in this installation, but I strongly suggest you get a professional to do this, unfortunately your getting in way ahead of yourself because you don't understand what wires are needed and what wires are not. This isn't a vehicle to learn "how to install" on especially a manual transmission vehicle which needs an OEM integration bypass module.

prabhakarglv

Hi,

I get success in installing the remote starter and did the test run this morning. Thanks a lot for your help all the time I requested. It's working like a charm now. It's definitely a big education for me. Thanks a lottttt.

Pubby.