airwalk987

hey guys i just bought a used audio system and i'm not sure what's the best way to plug these together to get the most out of it ??

heres what i've got :

Pioneer DEH-P4000 head unit

2x 6'' Alpine type-S

2x 6x9'' Alpine type-R

Kicker L5 solo baric 12'' sub

Power acoustik ov2-300 amp

Kicker 350.2 amp

and a Kicker 200.4 amp

should i bridge any of them ?? i want the most power for my sub.. advices are welcome !

airwalk987

up

John__Taylor

iTrader: (3)

I dont have time to go research the amps, etc, but it looks like you have a 2 channel, 4 channel, and a sub amp? I'm only guessing because I see the .2 and .4 (links to your amps would help).

The Pioneer has 3 (4v) pre outs iirc. 2 for the fronts, 2 for the rears, and 2 for the sub.

So if that .4 amp is a 4 channel (depending on its power) use it for the 4 6x9 speakers. plug the fronts & rears into it from the Pioneer H/U.

Use the sub amp to power the sub obviously, but if you went and posted links to your equipment we could see the specs and help you more (bridging, power handling, etc).

airwalk987

ok i understand well heres the equipement with links again sry

heres what i've got :

Pioneer DEH-P4000 head unit http://ziebartofottawa.com/index.php?main_page=product_info&products_id=50

2x 6'' Alpine type-S http://www.bestbuy.com/site/olspage.jsp?skuId=8699429&type=product&id=11994946 46605

2x 6x9'' Alpine type-R http://www.shopping.com/xPO-Alpine-Type-R-SPR-69LP-6-x9-2-way-Car-Speakers-6-x9-Car-Speakers

Kicker L5 solo baric 12'' sub http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16823

Power acoustik ov2-300 amp
http://www.amazon.com/Power-Acoustik-OV2-300-2-Channel-Amplifier/dp/B00009W5LC

Kicker 350.2 amp
http://www.crutchfield.com/S-3vqvA7Zv4ze/p_2064KX3502/Kicker-KX350-2.html

and a Kicker 200.4 amp
http://www.sonicelectronix.com/item_3579_Kicker+KX200.4.html

thanks for futur helps

airwalk987

put this up !

airwalk987

is the kicker kx350.2 amp way too low for my sub will it even worth it or ??

Tom.F.1

iTrader: (1)

the 200.4 is fine for the 4 speakers, but that is the wrong amp for the sub.
The link for your sub is a DVC 4. Two four ohm coils. If you parallel them you have a 2 ohm load, won't work on that amp.
You need an amp that will do about 600 wrms @ 2 ohm.

I would double check the part number on the sub and make sure it is really DVC 4?

airwalk987

yea its probably the DVC 2 cuz the pre owner had this one wired on the sub

and it pounded kinda hard ... one question is the 200.4 rly enough for the

speakers or can i still plug the power acoustik for even better sound?? does it

worth the over stress on the battery ?